How to Fill a Pez Dispenser

Step-by-Step Guide

1. 1

   Step 1: Obtain a pack of Pez.

   If you don't have one at your location, some of the older and non super-stores sell refill packs for your device.
2. 2

   Step 2: Lay the dispenser on the table

   , This should make the dispenser tray slide out.
   
   Stop pushing when the tray stops moving and until it will click into place. , When inserting the candy, Always stick the candy into the dispenser vertically, never horizontally, as the candy dispenser will cause the candy to break upon significant pressure, if done horizontally. , Do not allow the tray to stand up yet. , Stop pushing when the device stops, otherwise you will crush any and all of the remaining candies in the device.
   
   If done hard enough, the device will break too! ,
3. 3

   Step 3: with the face pointing upward.

4. 4

   Step 4: Grab ahold of the face's sides with your thumb and forefinger (one on each side) and pull the face directly upward.

5. 5

   Step 5: Take out a piece of Pez from the package and insert the candy down into the shaft.

6. 6

   Step 6: Repeat this filling method several times until the roll has been used up in its entirety.

7. 7

   Step 7: Take the head again

8. 8

   Step 8: and push it's tray back in

9. 9

   Step 9: grabbing with your thumb and forefinger again

10. 10

    Step 10: as was used before.

11. 11

    Step 11: Stand the Pez machine back up

12. 12

    Step 12: once the tray has been pushed back in.

Detailed Guide

About the Author