How to Launch a Model Rocket Safely

Step-by-Step Guide

1. 1

   Step 1: Find a large field at least half as long and wide as the expected altitude of the rocket.

   Make sure there are no power-lines, trees or other obstructions.
   
   See the NAR (national association of rocketry) safety code for details.
2. 2

   Step 2: Set up the launch pad in the center of the field.

   Don't forget to put the safety cap on the launch rod. , Important:
   Only use the recommended motors for your rocket.
   
   Using the wrong motor could lead to physical injury or damage to your rocket. , If using cellulose wadding (often called "dog's barf"), use 3 times the diameter of the rocket. ,,,,, At zero, press the button and watch your rocket escape the surly bonds of earth. , Make sure the igniter is fully inserted into the motor, check electrical connections for short circuits, and try again.
   
   If it still doesn't launch, change the motor.
3. 3

   Step 3: Load the model rocket motor.

4. 4

   Step 4: Keep in mind that

5. 5

   Step 5: if you have a parachute or streamer recovery system

6. 6

   Step 6: you should place three squares of wadding in the rocket tube if using paper wadding (if you bought a kit

7. 7

   Step 7: this is the wadding that should have came with it).

8. 8

   Step 8: Place the igniter in the nozzle of the rocket motor and secure it with the plug provided.

9. 9

   Step 9: Remove the launch rod safety cap.

10. 10

    Step 10: Place the rocket carefully on the launch rod and attach the electrical clips to the ignitor.

11. 11

    Step 11: Stand back as far as the electrical cords allow and keep any spectators behind you.

12. 12

    Step 12: Insert the safety key into the launcher and begin the countdown.

13. 13

    Step 13: Remember

14. 14

    Step 14: if the rocket doesn't launch when you press the button

15. 15

    Step 15: wait at least 60 seconds before approaching it.

Detailed Guide

About the Author