How to Make a Flamethrower

Step-by-Step Guide

1. 1

   Step 1: Get a lighter.

   You can buy these from most small stores.
2. 2

   Step 2: Take off the cover.

   It should snap or pull off but you can also use pliers. , Turn the adjustment wheel all the way to the plus side (usually the right). , Lift the tab up so that it isn't touching the wheel and turn the tab all the way back to the left. , You can do this several times to turn it up as much as possible. , Be careful.
   
   You should get a 3"+ flame.
   
   You can readjust as necessary. , Take it up a notch by spraying WD-40 or engine degreaser at the flame.
   
   Hold both far from your body and away from other people and flammable objects.
   
   It will make a HUGE flame.
3. 3

   Step 3: Adjust the wheel.

4. 4

   Step 4: Turn it back to the left.

5. 5

   Step 5: Set it down and repeat.

6. 6

   Step 6: Turn it on.

7. 7

   Step 7: Make the flame bigger.

Detailed Guide

About the Author