How to Make a Good Staff Quickly
Find a stout stick about the same height as you ., Cut it off using some sort of saw or clippers. , Take the stick back to a dry, airy environment and skin it down using a knife of a sander. , Leave it to dry for about a day before skinning it...
Step-by-Step Guide
-
Step 1: Find a stout stick about the same height as you .
It should be made from wood that isn't bendy or brittle. -
Step 2: Cut it off using some sort of saw or clippers.
,, A planer is good because it makes the wood smooth but a penknife could be used. , To check if it's dry, hit it gently off another piece of wood.
It should make a nice crackling sound. , You can also stain or paint the staff.
If possible, you could laminate it. -
Step 3: Take the stick back to a dry
-
Step 4: airy environment and skin it down using a knife of a sander.
-
Step 5: Leave it to dry for about a day before skinning it again.
-
Step 6: Leave it in a warm
-
Step 7: dry place for about a week.
-
Step 8: To finish it off
-
Step 9: you could engrave your name or something into the wood this can be done using a knife or an engraving tool .
Detailed Guide
It should be made from wood that isn't bendy or brittle.
,, A planer is good because it makes the wood smooth but a penknife could be used. , To check if it's dry, hit it gently off another piece of wood.
It should make a nice crackling sound. , You can also stain or paint the staff.
If possible, you could laminate it.
About the Author
Nancy Jimenez
Writer and educator with a focus on practical organization knowledge.
Rate This Guide
How helpful was this guide? Click to rate: