How to Make a Monogrammed Keychain

Step-by-Step Guide

1. 1

   Step 1: Buy some small wooden tiles.

   These are available at craft stores, but you can also use old scrabble tiles.
2. 2

   Step 2: Cut a small letter out of a magazine.

   You can also stencil a letter onto some decorative paper or use a Cricut machine. ,, Make sure the right side is up.
   
   Allow it to dry according to package directions. , Paint very thin coats and allow them to dry completely before adding the next layer. , Use a small drill bit, about 3/32 in size.
   
   Drill at the top and center of the tile, making sure the hole does not break through the top. , Once your keychain is attached, you can use your keychain.
3. 3

   Step 3: Paint a layer of decoupage glue

4. 4

   Step 4: such as Mod Podge

5. 5

   Step 5: onto the side of a wooden tile.

6. 6

   Step 6: Place the monogram letter atop the wet layer of glue.

7. 7

   Step 7: Paint 2 or 3 additional layers of glue on top of the letter.

8. 8

   Step 8: Drill a hole into the top of the wooden block when the tile is dry and no longer tacky.

9. 9

   Step 9: Use pliers to force the smaller ring on the key chain loop through the drilled hole.

Detailed Guide

About the Author