How to Make a Reusable, Inexpensive, and Efficient Gravity Bong

Step-by-Step Guide

1. 1

   Step 1: Identify the usable socket sizes.

   They are between ½” and 5/8”, or 12 to 15mm in diameter.
2. 2

   Step 2: Using the mouth of the water/soda bottle

   ,,,, Pay special attention to the hole, and test it several times.
   
   If the hole is too big, water will flow out too quickly.
   
   The objective is to make the water flow out as slowly, but steadily as possible to ensure that the resulting smoke is at its densest, minimizing waste of the vacuum generated in the bottle. ,, Your bong is now ready to use. ,, Give time for the embers to spread., Keep in mind that the resulting smoke will be very potent, so don’t inhale too deeply.,, Repeat step
   1.
3. 3

   Step 3: test the fit of the socket.

4. 4

   Step 4: Wrap masking tape around the sides of the socket to make a sufficiently airtight seal.

5. 5

   Step 5: Add layers of tape as to ensure a snug fit.

6. 6

   Step 6: Place the metal gauze in the socket

7. 7

   Step 7: to create a “bowl” for the tobacco.

8. 8

   Step 8: Cut a hole in the bottom of the water bottle.

9. 9

   Step 9: Place the water bottle in the shaker

10. 10

    Step 10: and fill it with water.

11. 11

    Step 11: Load and place bowl in mouth of the bottle.

12. 12

    Step 12: Grab mouth of bottle and get ready to pull up.

13. 13

    Step 13: Light contents of bowl while pulling up the bottle slowly

14. 14

    Step 14: but steadily.

15. 15

    Step 15: Once the bottle is drained of water or the bowl is done

16. 16

    Step 16: pull off the bowl and inhale the contents of the bottle.

17. 17

    Step 17: Push the bottle back down slowly

18. 18

    Step 18: as pushing it down too quickly can result in splash damage.

19. 19

    Step 19: Load and place bowl in mouth of bottle.

Detailed Guide

About the Author