How to Make a Solar System Model
Find a cardboard box., Paint the box black., Gather five polystyrene balls., Choose your paints., Paint the sun., Paint the large planets the same way., Paint the ice giants., Add Saturn's rings., Shape five rocky planets out of clay., Poke a hole...
Step-by-Step Guide
-
Step 1: Find a cardboard box.
The planets in your solar system model will hang down inside this box.
You'll need to fit nine planets plus the sun into this, so make sure you have enough room.
This should be at least as large as a men's shoebox, which is roughly 15" x 10" x 5½" (36 x 25 x 13 cm)., Cover the inside of the box with black acrylic paint, along with the short outer sides.
Set the box aside on newspaper to dry.
For a more even background, trace the box onto black paper.
Cut out the paper rectangle and tape it to the base of the box. , If possible, find these in three different sizes.
They should all fit in the box with a little room left over, although they don't have to squeeze in all in a row.
You'll need:
One large ball to make the sun (maximum 4" / 10 cm across) Two medium balls to make Jupiter and Saturn (maximum 3" /
7.5 cm) Two small balls to make Uranus and Neptune (maximum 2" / 5 cm) , Acrylic paint is your best option, since some other paints can dissolve polystyrene.
Choose a variety of colors to paint your planets, including orange or gold, yellow, red, white, and dark blue.
If you're not sure whether a paint works on polystyrene, check the label for brush cleaning instructions.
If you can wash off the paint with water, the paint is water-based and safe to use.
If you need to use a solvent like white spirit or turpentine, the paint is solvent-based and may dissolve polystyrene., Stick a long skewer into your largest polystyrene ball to hold it in place.
Paint the entire surface with gold, yellow, or orange paint to make the sun.
Place the skewer in a tall jug or stick the end in a polystyrene block and leave the ball to dry.
A stenciling brush or other short-bristled brush will help you get the paint to stick into the nooks and crannies on your polystyrene ball.
You might need to let the first coat dry and use a larger brush to paint over it for an even color.If the paint doesn't stick at all, cover the ball with a thin layer of spackle, let it dry, and paint over that., The two medium balls are the two largest planets, Jupiter and Saturn.
These are called gas giants.
They each have a diameter about ten times larger than Earth's, and are made mostly of a heavy layer of gas surrounding a rocky core.Skewer these and place them in a polystyrene block or separate jugs, so the wet painted surfaces don't touch.
Jupiter's clouds form bands and spiral storms.
Paint this planet with red, orange, and white paint, swirled into patterns.
Saturn is pale yellow (a mix of yellow and white paint). , Your last two balls will represent Neptune and Uranus, the smaller gas giants or "ice giants." About four times the size of Earth in diameter, these planets formed from balls of ice and heavy elements.
Since then these materials have turned into a fluid core, surrounded by a layer of swirling gas.Paint Uranus a pale blue, made by mixing blue and white paint together.
White clouds sometimes form over the solid blue atmosphere.Neptune is almost the same color as Uranus, but looks darker because it's farther away and receives less light.Paint it blue. , Find a drinking glass with an opening the same size as the ball you used to make Saturn.
Put the glass down on gold or yellow construction paper and trace around it with a pencil.
To make a ring shape, put down a larger glass over your pencil circle, and trace around that as well.
Cut out this ring, then glue it around Saturn and let dry.
To cut out the ring, start by cutting out the larger circle.
Fold the circle gently in half without creasing it, then cut around the smaller circle. , You can use polymer clay, air dry clay, or homemade polymer clay substitute.
Roll five small balls (maximum 1" /
2.5 cm across) using several colors of clay:
Mercury is a brownish gray rock, with no cloud cover.You can make it out of red or gold clay instead for a prettier model.
Make Earth out of blue clay for now.
Make Venus out of pale yellow clay.
Pluto is technically not a planet (it's too small), but it can sneak in anyway.
Make it out of light brown clay, maybe with some charcoal mixed in to imitate its blotchy surface. , Use a large needle to pierce each rocky planet through the center.
You'll run thread through this hole later to hang the planets inside your box.
Poke the hole through Saturn at an angle, so the rings will be tilted when the planet is hanging down.
This will look better and give you a little extra room to arrange the planets. , Follow the dry instructions on the clay packaging.
Air dry clay dries on its own, while other types of polymer clay needs a low-temperature oven to harden.
For light colored clay, it's a good idea to set your oven about 10ºF (~5ºC) lower than the instructions recommend.
This can take twice as long to bake, but the chance of breaking is lower., Once the Earth clay is hard, paint on the continents with green acrylic paint., Once the black paint on the box has dried, use a white paint pen or small brush to paint white dots onto the inside of the box. , Once the sun is dry, stick a skewer all the way through the ball, then remove it.
Tape a piece of clear beading thread to the end of the skewer, and push it through the same hole.
Repeat for each polystyrene ball.
Each length of beading thread should be long enough to hang a planet from the "ceiling" of the box, when the box is on its side.
Five or six inches (13–15 cm) should be enough. , Hold the end of the thread and withdraw the skewer.
Knot the beading thread two or three times, then attach the knot to the polystyrene ball using a drop of glue from a hot glue gun. , Once the clay planets are dry, drop the clear thread through the holes you made earlier.
Attach the thread with a hot glue gun, as you did with the larger planets. , Put the box on its side and hold up the threads on the ceiling.
Stagger the position of the planets at different heights (top/bottom) and depths (front/back) so you can fit them all in the box.
The balls should go in this order:
Sun Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto , Once you find an arrangement that looks good and fits in the box, mark the box at the ten points where you'll hang the sun and planets.
Cut through the box at these points with a sharp knife, and feed the thread the planets are hanging from through each hole.
Tape down the thread with strong tape and cut off the extra thread. , Trace the side of the box onto black paper and cut out the rectangle.
Glue this over the top of the box to hide the tape.
Now you're ready to display your solar system model. , -
Step 2: Paint the box black.
-
Step 3: Gather five polystyrene balls.
-
Step 4: Choose your paints.
-
Step 5: Paint the sun.
-
Step 6: Paint the large planets the same way.
-
Step 7: Paint the ice giants.
-
Step 8: Add Saturn's rings.
-
Step 9: Shape five rocky planets out of clay.
-
Step 10: Poke a hole through each ball of clay.
-
Step 11: Let the clay dry.
-
Step 12: Paint the land onto earth.
-
Step 13: Paint on stars.
-
Step 14: Thread the polystyrene balls.
-
Step 15: Glue on the thread.
-
Step 16: Thread the clay planets.
-
Step 17: Arrange the planets in the model.
-
Step 18: Hang the planets in the box.
-
Step 19: Cover the top of the box with black paper.
-
Step 20: Finished.
Detailed Guide
The planets in your solar system model will hang down inside this box.
You'll need to fit nine planets plus the sun into this, so make sure you have enough room.
This should be at least as large as a men's shoebox, which is roughly 15" x 10" x 5½" (36 x 25 x 13 cm)., Cover the inside of the box with black acrylic paint, along with the short outer sides.
Set the box aside on newspaper to dry.
For a more even background, trace the box onto black paper.
Cut out the paper rectangle and tape it to the base of the box. , If possible, find these in three different sizes.
They should all fit in the box with a little room left over, although they don't have to squeeze in all in a row.
You'll need:
One large ball to make the sun (maximum 4" / 10 cm across) Two medium balls to make Jupiter and Saturn (maximum 3" /
7.5 cm) Two small balls to make Uranus and Neptune (maximum 2" / 5 cm) , Acrylic paint is your best option, since some other paints can dissolve polystyrene.
Choose a variety of colors to paint your planets, including orange or gold, yellow, red, white, and dark blue.
If you're not sure whether a paint works on polystyrene, check the label for brush cleaning instructions.
If you can wash off the paint with water, the paint is water-based and safe to use.
If you need to use a solvent like white spirit or turpentine, the paint is solvent-based and may dissolve polystyrene., Stick a long skewer into your largest polystyrene ball to hold it in place.
Paint the entire surface with gold, yellow, or orange paint to make the sun.
Place the skewer in a tall jug or stick the end in a polystyrene block and leave the ball to dry.
A stenciling brush or other short-bristled brush will help you get the paint to stick into the nooks and crannies on your polystyrene ball.
You might need to let the first coat dry and use a larger brush to paint over it for an even color.If the paint doesn't stick at all, cover the ball with a thin layer of spackle, let it dry, and paint over that., The two medium balls are the two largest planets, Jupiter and Saturn.
These are called gas giants.
They each have a diameter about ten times larger than Earth's, and are made mostly of a heavy layer of gas surrounding a rocky core.Skewer these and place them in a polystyrene block or separate jugs, so the wet painted surfaces don't touch.
Jupiter's clouds form bands and spiral storms.
Paint this planet with red, orange, and white paint, swirled into patterns.
Saturn is pale yellow (a mix of yellow and white paint). , Your last two balls will represent Neptune and Uranus, the smaller gas giants or "ice giants." About four times the size of Earth in diameter, these planets formed from balls of ice and heavy elements.
Since then these materials have turned into a fluid core, surrounded by a layer of swirling gas.Paint Uranus a pale blue, made by mixing blue and white paint together.
White clouds sometimes form over the solid blue atmosphere.Neptune is almost the same color as Uranus, but looks darker because it's farther away and receives less light.Paint it blue. , Find a drinking glass with an opening the same size as the ball you used to make Saturn.
Put the glass down on gold or yellow construction paper and trace around it with a pencil.
To make a ring shape, put down a larger glass over your pencil circle, and trace around that as well.
Cut out this ring, then glue it around Saturn and let dry.
To cut out the ring, start by cutting out the larger circle.
Fold the circle gently in half without creasing it, then cut around the smaller circle. , You can use polymer clay, air dry clay, or homemade polymer clay substitute.
Roll five small balls (maximum 1" /
2.5 cm across) using several colors of clay:
Mercury is a brownish gray rock, with no cloud cover.You can make it out of red or gold clay instead for a prettier model.
Make Earth out of blue clay for now.
Make Venus out of pale yellow clay.
Pluto is technically not a planet (it's too small), but it can sneak in anyway.
Make it out of light brown clay, maybe with some charcoal mixed in to imitate its blotchy surface. , Use a large needle to pierce each rocky planet through the center.
You'll run thread through this hole later to hang the planets inside your box.
Poke the hole through Saturn at an angle, so the rings will be tilted when the planet is hanging down.
This will look better and give you a little extra room to arrange the planets. , Follow the dry instructions on the clay packaging.
Air dry clay dries on its own, while other types of polymer clay needs a low-temperature oven to harden.
For light colored clay, it's a good idea to set your oven about 10ºF (~5ºC) lower than the instructions recommend.
This can take twice as long to bake, but the chance of breaking is lower., Once the Earth clay is hard, paint on the continents with green acrylic paint., Once the black paint on the box has dried, use a white paint pen or small brush to paint white dots onto the inside of the box. , Once the sun is dry, stick a skewer all the way through the ball, then remove it.
Tape a piece of clear beading thread to the end of the skewer, and push it through the same hole.
Repeat for each polystyrene ball.
Each length of beading thread should be long enough to hang a planet from the "ceiling" of the box, when the box is on its side.
Five or six inches (13–15 cm) should be enough. , Hold the end of the thread and withdraw the skewer.
Knot the beading thread two or three times, then attach the knot to the polystyrene ball using a drop of glue from a hot glue gun. , Once the clay planets are dry, drop the clear thread through the holes you made earlier.
Attach the thread with a hot glue gun, as you did with the larger planets. , Put the box on its side and hold up the threads on the ceiling.
Stagger the position of the planets at different heights (top/bottom) and depths (front/back) so you can fit them all in the box.
The balls should go in this order:
Sun Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto , Once you find an arrangement that looks good and fits in the box, mark the box at the ten points where you'll hang the sun and planets.
Cut through the box at these points with a sharp knife, and feed the thread the planets are hanging from through each hole.
Tape down the thread with strong tape and cut off the extra thread. , Trace the side of the box onto black paper and cut out the rectangle.
Glue this over the top of the box to hide the tape.
Now you're ready to display your solar system model. ,
About the Author
Jessica Adams
Creates helpful guides on hobbies to inspire and educate readers.
Rate This Guide
How helpful was this guide? Click to rate: