How to Make a Vaporizer Stand

Step-by-Step Guide

1. 1

   Step 1: Place your vaporizer in a bottle cap or lid and fill it to the cap brim with hot melt glue.

   The hot melt glue gun is a useful tool to have to mend, build, and fabricate many items. ,,, Since this is a low profile stand, do not over wrap with paper.
   
   Over wrapping will cause your vaporizer to be wobbly in the stand. , Also, use a tweezer, hemostat, or needle-nose pliers to reach in and pull the bits of paper from the stand hole.
2. 2

   Step 2: Assemble these materials: vaporizer

3. 3

   Step 3: a sheet of paper

4. 4

   Step 4: masking tape or glue

5. 5

   Step 5: a bottle cap

6. 6

   Step 6: scissors

7. 7

   Step 7: tweezers or needle nose pliers

8. 8

   Step 8: a small knife

9. 9

   Step 9: and a hot melt glue gun with at least two glue sticks.

10. 10

    Step 10: If you do not have a hot melt glue gun

11. 11

    Step 11: consider buying one.

12. 12

    Step 12: In the absence of a hot melt glue gun

13. 13

    Step 13: use Shoe Goo

14. 14

    Step 14: melted wax

15. 15

    Step 15: spackling mix

16. 16

    Step 16: paper mache

17. 17

    Step 17: Choose a cap that is flat on both side.

18. 18

    Step 18: To keep the melted glue from adhering to your vaporizer

19. 19

    Step 19: wrap two layers of paper around the vaporizer base.

20. 20

    Step 20: To remove the paper from the plastic later

21. 21

    Step 21: soak the unfinished stand in water and ream the paper out with a small knife.

Detailed Guide

About the Author