How to Make Fruit Leather
Choose your fruit., Wash the fruit thoroughly., Peel the fruit if necessary., Chop the fruit into small pieces., Process the fruit, sugar and lemon juice., Preheat the oven to 200 degrees F. Using a low, slow cooking method will give the puree time...
Step-by-Step Guide
-
Step 1: Choose your fruit.
Fruit leather can be made with any type of fruit you want.
Choose just one fruit, or pick your favorite combination to make custom-flavored fruit leather.
You need a total of 1 1/2 pounds of fruit (not including the peels).
These fruits shape up into delicious leather with the perfect texture:
Strawberries Grapes Plums Peaches Nectarines Pears Apples Mangoes Papayas Kiwis Bananas -
Step 2: Wash the fruit thoroughly.
It's important to wash away all traces of dirt and pesticides before you begin.
Give each piece of fruit a thorough rinse under cool, running water.
Let the fruit air dry or use a paper towel to pat it dry. , If you're using a fruit with a thick peel, you'll want to remove the peel before you dehydrate the fruit.
The soft fruit inside the peel will dry out to just the right texture, but a dried peel could become too chewy to eat.
If you're using any of the following fruits, peel first:
Peaches Nectarines Pears Apples Mangoes Papayas Kiwis Bananas , The pieces don't have to be uniform; just small enough that you can weight them out them into your food processor.
Use a sharp knife to chop the fruit, and remove any bruised areas. , Place the fruit, the sugar and the lemon juice in your food processor.
Pulse the ingredients together until you have a smooth, lump-free puree.
You may need to do this in batches.If you don't want to use sugar, try substituting honey, or half sugar, half honey as an alternative.
Using honey will increase the time required to fully dry the fruit leather.
If you don't have a food processor, a blender will do.
Try to get the puree as smooth as possible, since lumps will hurt the texture of your fruit leather.
The lemon juice acts as a flavor enhancer and natural preservative.
Add more or less to taste. , The drying process takes longer but there's no risk of burning the fruit puree.
The fruit puree prep process is the same for this method.
Or try the microwave method, which also uses the same fruit puree prep process.
Instead of using the oven, simply microwave the puree on a medium setting for five minutes, or until it has thoroughly dried.
You'll have to do this in batches, since the entire recipe's worth of puree won't fit in the microwave., You can also use a nonstick silicone mat.
The fruit puree will stick to most other surfaces, so it's best to use a liner.If you're using a food dehydrator, line the tray with nonstick foil.
If you're using a microwave, do not use foil.
Use a microwaveable nonstick mat or a microwavable nonstick tray. , The layer should be about 1/8-inch thick, so that your fruit leather will be perfectly chewy.
If it's too thick, it will be difficult to chew; too thin, and it will turn out crispy instead of chewy. , Check on it after two and a half hours to see how it's progressing; in most cases it will still need more time.
After three or so hours, it should be slightly tacky, just the right texture for fruit leather.
If the fruit puree was on the dry side (as it would be if you used apples or bananas) it might be ready sooner than four hours.
If you're using a dehydrator, it will take at least eight hours or overnight.
Choose the correct setting according to the manufacturer's instructions.
If you're using the microwave, the leather should be finished in five to six minutes.
If you used a wet fruit, like strawberries or peaches, it might take longer than four hours. , If you try to handle it while it's still hot, it will fall apart and could cause a burn.
Set it on a cooling rack and wait at least twenty minutes before handling.
Check the underside of the fruit leather.
If it's completely dry on both sides, it's finished.
If it's still wet on the bottom, carefully flip the fruit leather over and return it to the oven for another hour or so to finish drying it out. , This will prevent the leather from sticking to itself when you roll it up.
Rolling up the fruit leather is a great way to store it for later., Use a pizza cutter or scissors to slice it into strips.
Make sure you cut through the waxed paper, too.
Make the strips as wide or as narrow as you'd like. , Start at the narrow end of a strip of leather and roll it up, as you would a jelly roll.
Keep going until the entire strip is rolled up with the waxed paper.
Continue rolling the rest of the strips. , The fruit leather will keep for up to a week. , -
Step 3: Peel the fruit if necessary.
-
Step 4: Chop the fruit into small pieces.
-
Step 5: Process the fruit
-
Step 6: sugar and lemon juice.
-
Step 7: Preheat the oven to 200 degrees F. Using a low
-
Step 8: slow cooking method will give the puree time to completely dry out without burning.If you own a food dehydrator
-
Step 9: you can use that instead.
-
Step 10: Line a baking sheet with nonstick foil.
-
Step 11: Spread the fruit puree in a thin layer on the baking sheet.
-
Step 12: Bake the puree for three hours.
-
Step 13: Let the fruit leather cool completely.
-
Step 14: Lay the cooled fruit leather on a sheet of waxed paper.
-
Step 15: Slice the fruit leather into strips.
-
Step 16: Roll up the strips.
-
Step 17: Store leather rolls in an airtight container.
-
Step 18: Finished.
Detailed Guide
Fruit leather can be made with any type of fruit you want.
Choose just one fruit, or pick your favorite combination to make custom-flavored fruit leather.
You need a total of 1 1/2 pounds of fruit (not including the peels).
These fruits shape up into delicious leather with the perfect texture:
Strawberries Grapes Plums Peaches Nectarines Pears Apples Mangoes Papayas Kiwis Bananas
It's important to wash away all traces of dirt and pesticides before you begin.
Give each piece of fruit a thorough rinse under cool, running water.
Let the fruit air dry or use a paper towel to pat it dry. , If you're using a fruit with a thick peel, you'll want to remove the peel before you dehydrate the fruit.
The soft fruit inside the peel will dry out to just the right texture, but a dried peel could become too chewy to eat.
If you're using any of the following fruits, peel first:
Peaches Nectarines Pears Apples Mangoes Papayas Kiwis Bananas , The pieces don't have to be uniform; just small enough that you can weight them out them into your food processor.
Use a sharp knife to chop the fruit, and remove any bruised areas. , Place the fruit, the sugar and the lemon juice in your food processor.
Pulse the ingredients together until you have a smooth, lump-free puree.
You may need to do this in batches.If you don't want to use sugar, try substituting honey, or half sugar, half honey as an alternative.
Using honey will increase the time required to fully dry the fruit leather.
If you don't have a food processor, a blender will do.
Try to get the puree as smooth as possible, since lumps will hurt the texture of your fruit leather.
The lemon juice acts as a flavor enhancer and natural preservative.
Add more or less to taste. , The drying process takes longer but there's no risk of burning the fruit puree.
The fruit puree prep process is the same for this method.
Or try the microwave method, which also uses the same fruit puree prep process.
Instead of using the oven, simply microwave the puree on a medium setting for five minutes, or until it has thoroughly dried.
You'll have to do this in batches, since the entire recipe's worth of puree won't fit in the microwave., You can also use a nonstick silicone mat.
The fruit puree will stick to most other surfaces, so it's best to use a liner.If you're using a food dehydrator, line the tray with nonstick foil.
If you're using a microwave, do not use foil.
Use a microwaveable nonstick mat or a microwavable nonstick tray. , The layer should be about 1/8-inch thick, so that your fruit leather will be perfectly chewy.
If it's too thick, it will be difficult to chew; too thin, and it will turn out crispy instead of chewy. , Check on it after two and a half hours to see how it's progressing; in most cases it will still need more time.
After three or so hours, it should be slightly tacky, just the right texture for fruit leather.
If the fruit puree was on the dry side (as it would be if you used apples or bananas) it might be ready sooner than four hours.
If you're using a dehydrator, it will take at least eight hours or overnight.
Choose the correct setting according to the manufacturer's instructions.
If you're using the microwave, the leather should be finished in five to six minutes.
If you used a wet fruit, like strawberries or peaches, it might take longer than four hours. , If you try to handle it while it's still hot, it will fall apart and could cause a burn.
Set it on a cooling rack and wait at least twenty minutes before handling.
Check the underside of the fruit leather.
If it's completely dry on both sides, it's finished.
If it's still wet on the bottom, carefully flip the fruit leather over and return it to the oven for another hour or so to finish drying it out. , This will prevent the leather from sticking to itself when you roll it up.
Rolling up the fruit leather is a great way to store it for later., Use a pizza cutter or scissors to slice it into strips.
Make sure you cut through the waxed paper, too.
Make the strips as wide or as narrow as you'd like. , Start at the narrow end of a strip of leather and roll it up, as you would a jelly roll.
Keep going until the entire strip is rolled up with the waxed paper.
Continue rolling the rest of the strips. , The fruit leather will keep for up to a week. ,
About the Author
Donald Jackson
Experienced content creator specializing in creative arts guides and tutorials.
Rate This Guide
How helpful was this guide? Click to rate: