How to Make Leather Vambraces
Take your measurements., Create the design., Draw your pattern on a paper.,Cut out the pattern., Connect everything with sticky tape., Transfer the pattern from paper to leather.,Cut the leather., Wet pieces of leather with wet cloth., Make the...
Step-by-Step Guide
-
Step 1: Take your measurements.
For the simplest vambrace pattern, just measure the circumference of the thickest part of your forearm, then your wrist and finally the length you want the vambrace to be.
This is the basic pattern for most vambraces. , Draw the prototype in 3D first, then figure out the components you'll need.
If this is your first time working with leather, chose a simple design., To be more precise, you can use computer editor to draw it and then print.
Don't forget to mark some places for eyelets.
Do this on both sides, you will use them for laces. ,, You should make sure that everything goes as planned and that the pattern matches your measurements., If your vambrace consists of multiple pieces, try to decrease the space between different parts.
This way you'll spend less leather.,, This will make it easier to work with., Lay it on your arm and press down gently., When leather dries, it keeps its shape., You'll use them for laces.
Only do this when the leather is completely dry., You can color it with oil leather dyes, clean the edge if it's too rough.
Experiment and be creative!, -
Step 2: Create the design.
-
Step 3: Draw your pattern on a paper.
-
Step 4: Cut out the pattern.
-
Step 5: Connect everything with sticky tape.
-
Step 6: Transfer the pattern from paper to leather.
-
Step 7: Cut the leather.
-
Step 8: Wet pieces of leather with wet cloth.
-
Step 9: Make the leather take shape of your arm.
-
Step 10: Wait until it dries and take it off.
-
Step 11: Make a few holes.
-
Step 12: Decorate the leather.
-
Step 13: Put the laces in.
Detailed Guide
For the simplest vambrace pattern, just measure the circumference of the thickest part of your forearm, then your wrist and finally the length you want the vambrace to be.
This is the basic pattern for most vambraces. , Draw the prototype in 3D first, then figure out the components you'll need.
If this is your first time working with leather, chose a simple design., To be more precise, you can use computer editor to draw it and then print.
Don't forget to mark some places for eyelets.
Do this on both sides, you will use them for laces. ,, You should make sure that everything goes as planned and that the pattern matches your measurements., If your vambrace consists of multiple pieces, try to decrease the space between different parts.
This way you'll spend less leather.,, This will make it easier to work with., Lay it on your arm and press down gently., When leather dries, it keeps its shape., You'll use them for laces.
Only do this when the leather is completely dry., You can color it with oil leather dyes, clean the edge if it's too rough.
Experiment and be creative!,
About the Author
Nancy Brooks
Experienced content creator specializing in creative arts guides and tutorials.
Rate This Guide
How helpful was this guide? Click to rate: