How to Operate the SinoBaler Bottle Baler

Step-by-Step Guide

1. 1

   Step 1: Press UP button to move the platen upwards and then open the material Feeding Door after the platen is on the top position

   The platen will automatically go upwards when it reaches the bottom limited switches, Once the platen does not move upwards, it means that the bale has reached the biggest density within the capacity of this machine., The door will be opened by hydraulic-driven.,,, The bale will be ejected out by the chain. (DO NOT STAND IN FRONT OF THE DOORS FOR SAFETY CONSIDERATION!),,
2. 2

   Step 2: Load material into the chamber room till it is fully filled into the chamber.

3. 3

   Step 3: Close and lock the Feeding Door by handle.

4. 4

   Step 4: Press DOWN button to activate the platen move downwards.

5. 5

   Step 5: Repeat the process from 2 to 4 for several times.

6. 6

   Step 6: Open the Chamber Door by pressing button OPEN.

7. 7

   Step 7: Go to the rear of the baler

8. 8

   Step 8: lay out the strapping material (PP/PE/Steel wires) through the channel and strap bale.

9. 9

   Step 9: Go to the rear of the machine

10. 10

    Step 10: hang up the chain on the hook that is at the back of the platen

11. 11

    Step 11: Press UP button to make the platen move upwards.

12. 12

    Step 12: Press STOP button to stop the motor if you want

13. 13

    Step 13: Cut off the power if you do not use the machine

Detailed Guide

About the Author