How to Rough Wire Homes More Efficiently
Put safety first., Focus on correctness and quality., Work quickly but mostly, efficiently., Make a plan to reduce your steps., Do your homework., Redraw the floor plan to reduce your "travel"., Prepare all your notes and plans for the actual...
Step-by-Step Guide
-
Step 1: Put safety first.
When it comes to better work ethics, safety comes first.
A lot of people hurt themselves because of carelessness.
However, all electricians know that just knowing how to pull wire in a home is mostly about speed and requires little or no thinking, so you would need to be more concerned about being “hit” by a nail than an electrical shock.
Just keep safety in your mind at all times, regardless of how fast you want to go. , Is the second most important thing to remember, because it’s obvious that it actually wastes more time when something has to be fixed.
Your best feeling and understanding is number one when it comes to efficiency.
If you keep at it and do rough wiring enough times, speed will mostly just come on its own; how nice is that?, When you hustle it sure will help you to finish more quickly, and make twice the amount that the one moving half your pace will.
You must remember however, that there is only a limit to how fast our bodies can move and what they can do.
In the midst of bettering yourselves in this field, remember this old saying “You can’t cut down a tree with a dual axe; you must stop and sharpen it.” , Wiring a house typically takes a lot of "travel" around the house, as you pull wire through for every switch and plug.
This is one good way to become more efficient, but how many steps can you really reduce? This understanding can only come from considering your time, working out a rhythm, and doing your homework., Consider your biggest time sink: the wire pulling stages.
All together it takes up to 2/3 of the work needed in wiring a home, and solving this problem comes down to how much wire you pull and staple at once.
Most might think, “But nobody is that good”; well that’s where homework comes into use.
Homework is very easy and it's not time wasted. Observe the home before you plan; a perfect day to do this would be after you just marked, boxed and drilled the first day.
You can take notes as you go. , More advanced pulling means more travel.
If you're smart about your plan, you can draw it up with each wire to be run individually and then combine the runs traveling closest together into each one set of runs to be pulled and stapled together at a time.
You can even think about fewer trips up and down the stairs by including the drops and the "down and under" (around beams or high ceiling legs) you found during the earlier planning phase.
You can even do your box fill calculations for what meets code and fits in boxes during homework time. , When you’re done your homework and have it with you, ready for pulling them and checking off at the same time.
Everybody pulls different, but a few steps in the process can prevent a lot of danger, time wasted, and mix ups.
Next day you'll go to work and just have to look at paper, pull plenty at a time easily, staple up more at once, resulting in plenty of time saved for the second floor, basement and first floor. , Knowing that there are all kinds of different tasks in wiring a home; perhaps 37, and every one of them is very easy to only do one at a time.
When you know the tasks inside and out and can combined some of them together, though, “you are all set” for a quick run through.
These are the tasks you'll have to complete, and below are more steps for doing them efficiently:
1.
Mark the second floor low boxes
2.
Mark the second floor ceiling boxes
3.
Mark the second floor home run locations
4.
Mark the first floor low boxes
5.
Mark the first floor ceiling boxes.
6.
Mark the first floor home run locations
7.
Mark the basement ceiling
8.
Mark the basement low boxes (if it’s a finish)
9.
Lay out all of the recess cans and exhaust fans.
10.
Box out the second floor low boxes
11.
Box out the second floor ceiling.
12.
Box out the first floor low boxes
13.
Box out the first floor ceiling boxes
14.
Box out the basement low boxes (if finished)
15.
Box out the basement ceiling boxes
16.
Second floor drill out 17(1).
First floor low drill out 17(2).
First floor ceiling drill out (not common but wiser to use a better drill and take homework notes)
18.
Second floor home runs
19.
Second floor long pulls (most do lesser at a time)
20.
Short jumps (bedroom feeds and bathroom legs)
21.
Cut in when everything is stabbed in the box (many do)
22.
Nail plate the second floor 23(1).
Pull the first floor home runs 23(2).
Pull the basement home runs
24.
First floor long pulls (lesser at a time)
25.
Basement long pulls (lesser at a time)
26.
First floor jumps
27.
First floor jump arounds
28.
Weatherproof jumps
29.
Basement keyless
30.
Cut in first floor
31.
Brace 3 and 4 gang boxes
32.
Nail plate the first floor
33.
Basement jumps (if finished)
34.
Cut in panel
35.
High ceiling
36.
Pan off
37.
Clean up. , Saving half of the time needed on the second floor, mark out for both the high boxes and the low ones. , It’s time to mark up the second floor home runs everywhere that they are supposed to go. , Combining 4 and 5 is the same way as marking the second floor, now it’s more complex, so greater care and more looking over is needed , The old number 6 means marking the first floor, but it’s good to have a good understanding of what the basement home runs are like because they are all pulled in the same path as the first floors and could more than likely be of a different type of wire., Combines 7 and 8 (8 not always) but marking up everything that is needed in the basement and better to help with what’s needed for the first floor too., You should lay out all of the recess that is needed for 9 independently, especially if there are a lot of them, making the next task lesser to carry., Combining 10, 11 and 31 for the entire box out of the second floor and brace the 3 and 4gangs as you go. , Bringing together 12, 13, and another part of 31 for the entire first floor box out and bracing., If it’s a finished basement go ahead and box both the highs and lows, or just the ceilings if not., The second floor drill out doesn’t have a lot to it; still it would be a good idea to think about any drops or down and under to be drilled right away. , 17(1) and 17(2) in drilling the low holes on the first floor and carrying a ladder for drilling the ceiling holes needed.
It’s better to use a stronger and longer lasting drill for what may be more, but as you go, being aware of any down and under or drops that could be recorded(taking notes) to add to your homework.
Dropping bobbers into each more complex hole( ½ hot, switches, and home runs) for identification as you are pulling the first floor from the basement. , Pulling the second floor home runs isn’t really much for saving unless you just pull more at a time., It would still vary depending on your understanding of it, but pull the second floor long shots., You have already done all of your pulls that require traveling, and you can now as you go throughout the second floor pull all the short stuff and cut in as you go.
Be aware of everything you just pulled; trace it all down as you are doing your easiest tasks as you go and you’ll be able to detect if anything was missed, mixed, or double fed., Many homes may have sprinkler pipe or need to be foam sprayed, now would be more than half the time saved if you carried cardboard and the spray foam as you go., The home runs for the first floor and basement do go to different spots but flow in the same path as the weatherproof jumps, saving more than half the time here with carrying them all at the same time.
Look over where they are all going first and be sure to have the home runs on your spinners and the weatherproof jumps separately unraveled., The first floor long shots, basement long shots, first floor jump around, and basement keyless are ready.
Homework is needed here even more useful then the second floor long shot phase, because now pulling the more complex and plentiful runs you can just look at your homework, pull, and say, "I'm done," still keeping the keyless on separate real. , The basement and first floor jumps that was too short of a run to include in your homework can now be easily jumped, meanwhile cut in basement as you go., “Button up” the first now that the basement is 100% and cut it in(now it’s even more complex than the second floor so do remember all you pulled and trace it down), nail plate as you go as well as pan off., Isn’t a lot of time saved easily, but a High Ceiling can have all kinds of time saved to it too., Being aware of nothing missed and even thinking of refreshments as well. , It’s easy enough to just put all things in the garage or outside and sweep up all the debris as throughout the entire house. -
Step 2: Focus on correctness and quality.
-
Step 3: Work quickly but mostly
-
Step 4: efficiently.
-
Step 5: Make a plan to reduce your steps.
-
Step 6: Do your homework.
-
Step 7: Redraw the floor plan to reduce your "travel".
-
Step 8: Prepare all your notes and plans for the actual wiring.
-
Step 9: Organize your tasks for action.
-
Step 10: Start your day by combining tasks 1 and 2.
-
Step 11: Do your first non-combo (task easier to keep left alone).
-
Step 12: Mark the first floor now.
-
Step 13: Mark the first floor and basement home runs.
-
Step 14: Move on to marking the basement.
-
Step 15: Don’t burden yourself by trying to carry to much at once.
-
Step 16: Begin the task that's the first one that saves more than half the time.
-
Step 17: Start another like the second floor.
-
Step 18: Bring together 14 and 15.
-
Step 19: Don’t combine any task with 16.
-
Step 20: Begin another thing that saves a lot of time.
-
Step 21: Do number 18; this one is varied.
-
Step 22: Start number 19
-
Step 23: but remember that homework has come into use.
-
Step 24: Combine and do tasks 20 and 21.
-
Step 25: Keep number 22 as a non combo.
-
Step 26: Do the 23(1)
-
Step 27: 23(2) together and 28 with care.
-
Step 28: Look through then combine 24
-
Step 29: and 29 to finally easily save extra time.
-
Step 30: Bring 26 and 33 together.
-
Step 31: Multiply 30
-
Step 32: and 36.
-
Step 33: Get ready for the non combo number 35.
-
Step 34: Cut in the panel for your number 34 task.
-
Step 35: Clean-up now for completion to 37.
Detailed Guide
When it comes to better work ethics, safety comes first.
A lot of people hurt themselves because of carelessness.
However, all electricians know that just knowing how to pull wire in a home is mostly about speed and requires little or no thinking, so you would need to be more concerned about being “hit” by a nail than an electrical shock.
Just keep safety in your mind at all times, regardless of how fast you want to go. , Is the second most important thing to remember, because it’s obvious that it actually wastes more time when something has to be fixed.
Your best feeling and understanding is number one when it comes to efficiency.
If you keep at it and do rough wiring enough times, speed will mostly just come on its own; how nice is that?, When you hustle it sure will help you to finish more quickly, and make twice the amount that the one moving half your pace will.
You must remember however, that there is only a limit to how fast our bodies can move and what they can do.
In the midst of bettering yourselves in this field, remember this old saying “You can’t cut down a tree with a dual axe; you must stop and sharpen it.” , Wiring a house typically takes a lot of "travel" around the house, as you pull wire through for every switch and plug.
This is one good way to become more efficient, but how many steps can you really reduce? This understanding can only come from considering your time, working out a rhythm, and doing your homework., Consider your biggest time sink: the wire pulling stages.
All together it takes up to 2/3 of the work needed in wiring a home, and solving this problem comes down to how much wire you pull and staple at once.
Most might think, “But nobody is that good”; well that’s where homework comes into use.
Homework is very easy and it's not time wasted. Observe the home before you plan; a perfect day to do this would be after you just marked, boxed and drilled the first day.
You can take notes as you go. , More advanced pulling means more travel.
If you're smart about your plan, you can draw it up with each wire to be run individually and then combine the runs traveling closest together into each one set of runs to be pulled and stapled together at a time.
You can even think about fewer trips up and down the stairs by including the drops and the "down and under" (around beams or high ceiling legs) you found during the earlier planning phase.
You can even do your box fill calculations for what meets code and fits in boxes during homework time. , When you’re done your homework and have it with you, ready for pulling them and checking off at the same time.
Everybody pulls different, but a few steps in the process can prevent a lot of danger, time wasted, and mix ups.
Next day you'll go to work and just have to look at paper, pull plenty at a time easily, staple up more at once, resulting in plenty of time saved for the second floor, basement and first floor. , Knowing that there are all kinds of different tasks in wiring a home; perhaps 37, and every one of them is very easy to only do one at a time.
When you know the tasks inside and out and can combined some of them together, though, “you are all set” for a quick run through.
These are the tasks you'll have to complete, and below are more steps for doing them efficiently:
1.
Mark the second floor low boxes
2.
Mark the second floor ceiling boxes
3.
Mark the second floor home run locations
4.
Mark the first floor low boxes
5.
Mark the first floor ceiling boxes.
6.
Mark the first floor home run locations
7.
Mark the basement ceiling
8.
Mark the basement low boxes (if it’s a finish)
9.
Lay out all of the recess cans and exhaust fans.
10.
Box out the second floor low boxes
11.
Box out the second floor ceiling.
12.
Box out the first floor low boxes
13.
Box out the first floor ceiling boxes
14.
Box out the basement low boxes (if finished)
15.
Box out the basement ceiling boxes
16.
Second floor drill out 17(1).
First floor low drill out 17(2).
First floor ceiling drill out (not common but wiser to use a better drill and take homework notes)
18.
Second floor home runs
19.
Second floor long pulls (most do lesser at a time)
20.
Short jumps (bedroom feeds and bathroom legs)
21.
Cut in when everything is stabbed in the box (many do)
22.
Nail plate the second floor 23(1).
Pull the first floor home runs 23(2).
Pull the basement home runs
24.
First floor long pulls (lesser at a time)
25.
Basement long pulls (lesser at a time)
26.
First floor jumps
27.
First floor jump arounds
28.
Weatherproof jumps
29.
Basement keyless
30.
Cut in first floor
31.
Brace 3 and 4 gang boxes
32.
Nail plate the first floor
33.
Basement jumps (if finished)
34.
Cut in panel
35.
High ceiling
36.
Pan off
37.
Clean up. , Saving half of the time needed on the second floor, mark out for both the high boxes and the low ones. , It’s time to mark up the second floor home runs everywhere that they are supposed to go. , Combining 4 and 5 is the same way as marking the second floor, now it’s more complex, so greater care and more looking over is needed , The old number 6 means marking the first floor, but it’s good to have a good understanding of what the basement home runs are like because they are all pulled in the same path as the first floors and could more than likely be of a different type of wire., Combines 7 and 8 (8 not always) but marking up everything that is needed in the basement and better to help with what’s needed for the first floor too., You should lay out all of the recess that is needed for 9 independently, especially if there are a lot of them, making the next task lesser to carry., Combining 10, 11 and 31 for the entire box out of the second floor and brace the 3 and 4gangs as you go. , Bringing together 12, 13, and another part of 31 for the entire first floor box out and bracing., If it’s a finished basement go ahead and box both the highs and lows, or just the ceilings if not., The second floor drill out doesn’t have a lot to it; still it would be a good idea to think about any drops or down and under to be drilled right away. , 17(1) and 17(2) in drilling the low holes on the first floor and carrying a ladder for drilling the ceiling holes needed.
It’s better to use a stronger and longer lasting drill for what may be more, but as you go, being aware of any down and under or drops that could be recorded(taking notes) to add to your homework.
Dropping bobbers into each more complex hole( ½ hot, switches, and home runs) for identification as you are pulling the first floor from the basement. , Pulling the second floor home runs isn’t really much for saving unless you just pull more at a time., It would still vary depending on your understanding of it, but pull the second floor long shots., You have already done all of your pulls that require traveling, and you can now as you go throughout the second floor pull all the short stuff and cut in as you go.
Be aware of everything you just pulled; trace it all down as you are doing your easiest tasks as you go and you’ll be able to detect if anything was missed, mixed, or double fed., Many homes may have sprinkler pipe or need to be foam sprayed, now would be more than half the time saved if you carried cardboard and the spray foam as you go., The home runs for the first floor and basement do go to different spots but flow in the same path as the weatherproof jumps, saving more than half the time here with carrying them all at the same time.
Look over where they are all going first and be sure to have the home runs on your spinners and the weatherproof jumps separately unraveled., The first floor long shots, basement long shots, first floor jump around, and basement keyless are ready.
Homework is needed here even more useful then the second floor long shot phase, because now pulling the more complex and plentiful runs you can just look at your homework, pull, and say, "I'm done," still keeping the keyless on separate real. , The basement and first floor jumps that was too short of a run to include in your homework can now be easily jumped, meanwhile cut in basement as you go., “Button up” the first now that the basement is 100% and cut it in(now it’s even more complex than the second floor so do remember all you pulled and trace it down), nail plate as you go as well as pan off., Isn’t a lot of time saved easily, but a High Ceiling can have all kinds of time saved to it too., Being aware of nothing missed and even thinking of refreshments as well. , It’s easy enough to just put all things in the garage or outside and sweep up all the debris as throughout the entire house.
About the Author
Brian Flores
Brian Flores has dedicated 1 years to mastering lifestyle and practical guides. As a content creator, Brian focuses on providing actionable tips and step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: