How to Stow Away the Stow n Go Seats in a Chrysler or Dodge Minivan

Step-by-Step Guide

1. 1

   Step 1: Pull the carpet that is in front of the seat upwards with both of your hands

   It's preferable to place these carpets outside the vehicle when you do so, but after a few times, you'll be able to determine just how much space you'll need to use to be able to find a place to put these.
   
   Pulling up the carpeting, will expose the cabinets that will later hold your seats.
2. 2

   Step 2: and place it to the side.

   If there is a lever or pull-cord to fold these headrests down, pull it until the headrest have been completely folded down.
   
   You may have to push the headrest into it's closing position. , The lever is on the side of the seat. , It should be just noticeable to the untrained eye. , Doing this will expose an area that is able to accompany the seat. , This should free the seats from their locked and upright position.
   
   It will also cause the seat to fall frontwards slightly. , The seat should "roll over" onto it's back. ,,,
3. 3

   Step 3: Ensure that both headrests are down.

4. 4

   Step 4: Pull the lever that folds the middle seat's seat-back into a folded position.

5. 5

   Step 5: Take notice of the knob on the floor slightly underneath the seat.

6. 6

   Step 6: Push on the cabinet-door from the back

7. 7

   Step 7: and hold it back.

8. 8

   Step 8: Pull backwards on the knob.

9. 9

   Step 9: Push on the back of the seat.

10. 10

    Step 10: Release the handle to the cabinet door you should be holding onto now

11. 11

    Step 11: once the seat has been properly stowed into the basket.

12. 12

    Step 12: Repeat this process with the other seat

13. 13

    Step 13: assuming you need the space to do both seats.Do the same with the other side seat

14. 14

    Step 14: if you need to.

15. 15

    Step 15: Return the carpets to their normal positions over top of the cabinet door.

Detailed Guide

About the Author