How to Use a Pacifier Clip
Locate the shirt you'd like to pin the clip to., Locate the clip you'd like to use., Look at the clip., Sample the movement of the clip., Release the grip from the shaft, and slide it upward, if you find it is working correctly. , Look at how the...
Step-by-Step Guide
-
Step 1: Locate the shirt you'd like to pin the clip to.
Any material will do.
However, 100% rayon clothing will be troublesome to most parents, when trying to remove the pacifier quickly, if needed to be removed for any reason. -
Step 2: Locate the clip you'd like to use.
Whether it's from the store, or from one you've made at home, they all work approximately the same. , Most have a clip-like piece that is at the end of a long "stalk" which has little prong-like grips.
Attached to this area (or somewhere on the clip, you'll find a moving piece).
Attached to this clip, you'll find a long narrow piece of fabric. , Make sure it works for it's intended purpose, and that it slides down the shaft completely and stops at the end. ,, Some have an easy-to-open Velcro seal. ,,,,,, Position the pinch, so that it is almost directly center to the placement of the pacifier into the child's mouth. , Position the clip firmly on this piece of clothing. ,, -
Step 3: Look at the clip.
-
Step 4: Sample the movement of the clip.
-
Step 5: Release the grip from the shaft
-
Step 6: and slide it upward
-
Step 7: if you find it is working correctly.
-
Step 8: Look at how the narrow piece of fabric opens.
-
Step 9: Release the sealing mechanism
-
Step 10: but don't allow the fabric to be completely removed.
-
Step 11: Find the pacifier's holder mechanism.
-
Step 12: Slide the fabric underneath the holder mechanism
-
Step 13: so that the fabric can slide through the one side and around to the other.
-
Step 14: Fold the fabric back over
-
Step 15: and attach the two pieces of fabric once again.
-
Step 16: Open the clip a bit.
-
Step 17: Pinch the clothing just a little bit.
-
Step 18: Guide the clip portion over to the pinched area.
-
Step 19: Slide the grippers down once again.
-
Step 20: Bring the pacifier back up
-
Step 21: and insert it into the child's mouth.
Detailed Guide
Any material will do.
However, 100% rayon clothing will be troublesome to most parents, when trying to remove the pacifier quickly, if needed to be removed for any reason.
Whether it's from the store, or from one you've made at home, they all work approximately the same. , Most have a clip-like piece that is at the end of a long "stalk" which has little prong-like grips.
Attached to this area (or somewhere on the clip, you'll find a moving piece).
Attached to this clip, you'll find a long narrow piece of fabric. , Make sure it works for it's intended purpose, and that it slides down the shaft completely and stops at the end. ,, Some have an easy-to-open Velcro seal. ,,,,,, Position the pinch, so that it is almost directly center to the placement of the pacifier into the child's mouth. , Position the clip firmly on this piece of clothing. ,,
About the Author
Dorothy Ellis
Experienced content creator specializing in DIY projects guides and tutorials.
Rate This Guide
How helpful was this guide? Click to rate: