How to Wrap a Sprained Ankle
Pick your bandage., Prepare the bandage., Position the bandage., Add extra padding, if necessary., Decide if athletic tape is right for you., Begin with an underwrap., Secure the anchor., Create a stirrup., Create an "x" over the foot., Make a...
Step-by-Step Guide
-
Step 1: Pick your bandage.
For most people, the best choice of wrapping for a compression wrap is a cloth elastic bandage, sometimes colloquially known as an “ACE bandage,” after a common brand of elastic bandage.
Any brand of elastic bandage will work.
However, wider bandages (between one-and-half and three inches wide) are usually easier to use.
Cloth elastic bandages are comfortable, since they're made of stretchy cloth.
They are also reusable. (When you're finished, you can wash it and use it again when you need it.) Some bandages come with metal clips for fastening the end of the wrap.
If yours does not include metal clips, medical tape can also be used to secure the end of the bandage when the wrap is complete.
You can also securely tuck the end of the bandage into the wrap. -
Step 2: Prepare the bandage.
If your elastic bandage is not already wrapped, roll the bandage into a tight coil.
Compression wraps should fit against the foot and ankle snugly, so it helps to have the cloth wrap coiled tightly from the beginning, making it less likely that you will need to stretch and readjust the bandage as you go. , If you are wrapping your own ankle, it may be easier to position the rolled bandage on the inside of your foot.
If you are wrapping someone else’s ankle, it may be easier position the rolled bandage on the outside of the foot.
In either case, it’s crucial that coil face away from the foot, so that the coiled portion of the bandage is on the outside of the foot as you wrap it.
For example, if you think of the coiled bandage as a roll of toilet paper and the foot as a wall, the coiled bandage should be in an “under” orientation., For extra support, you can place a gauze pad on either side of the ankle before wrapping.
Horseshoe-shaped padding cut from foam or felt is also used for extra stability in compression wraps. , In most cases, it’s best to use a cloth bandage to wrap a sprain; however, some individuals engaged in athletic activity, such as running, prefer the feel of athletic tape.
While athletic tape works to wrap an injured ankle, it is primarily made to wrap an uninjured joint before activity to avoid injury, not to protect an already injured ankle.
Even though the thinner, sturdier athletic tape makes continued activity easier than the bulkier, more flexible cloth bandage, continued athletic activity on a sprained ankle is not advised., Underwrap is a nonadhesive material used to wrap the foot and ankle before the tape is applied, so that the tape doesn't pull at the surface of the skin.
Starting at the ball of the foot, wind the underwrap around the foot up to the ankle, leaving the heel uncovered.
Underwrap is available at drugstores and sporting goods stores.
It is possible to tape an ankle without underwrap, but it is much less comfortable. , Cut a strip of tape long enough to wrap 1 1/2 times around your ankle.
Wind it around your ankle, over the underwrap, to hold the underwrap in place.
This is called the anchor, since it anchors the rest of the taping in place.
If the ankle has a lot of hair, it can be shaved so that the tape doesn't stick to it.
If necessary, use a second piece of tape to make sure the underwrap is secure. , Place the end of a piece of tape on one side of the anchor.
Bring it down under the arch of the foot and back up to the other side of the anchor.
Press it lightly to secure it in place.
Repeat with two more pieces of tape overlapping the first one to create a sturdy stirrup. , Place the end of a piece of tape at the ankle bone and run it diagonally over the top of the foot.
Bring it down under the arch and toward the inside of the heel.
Then bring it around the back of the heel and back up over the foot to create the other part of the "x."
Place the end of a piece of tape on the outside of the ankle, just above the bone.
Run it over the top of the foot at an angle, then bring it under the arch and up the other side of the foot.
Next bring it around the ankle and back to the point where you started.
Repeat the figure eight.
Use another piece of tape to make a second figure eight that overlaps the first one.
This will ensure that the wrap is held securely in place and provides enough support for the ankle to heal properly. , Place the end of the bandage where the toes meet the foot.
Begin by wrapping the bandage around the ball of the foot.
Hold the end of the bandage against the ball of the foot with one hand, and use the other to bring the tail around the foot from the outside.
Keep the bandage tight, but don't wrap it so tight that it decreases blood flow to the foot and toes. , Wrap the ball of the foot twice, to hold the bandage in place, then begin moving up towards the ankle, being sure to leave at least one-half inch of bandage overlapping the previous layer.
Make sure the layers are smooth and even with no unnecessary bulges or lumps.
Start over if you need to do the job more neatly. , When you get to the ankle, bring the end of the bandage up outside of the foot, over the instep and around the inside of the ankle.
Then bring it around the heel, back up over the instep, under the foot, and around the ankle.
Continue making this “figure eight” around the ankle several times to fully stabilize the ankle. , The last wrap should rise several inches above the ankle to help stabilize it.
Use the metal fasteners or medical tape to secure the remaining bandage.
Excess bandage can also be tucked under the last layer of bandage, provided there’s not too much excess.
If you are wrapping a child's ankle, there may be too much excess bandage, and it will have to be cut. -
Step 3: Position the bandage.
-
Step 4: Add extra padding
-
Step 5: if necessary.
-
Step 6: Decide if athletic tape is right for you.
-
Step 7: Begin with an underwrap.
-
Step 8: Secure the anchor.
-
Step 9: Create a stirrup.
-
Step 10: Create an "x" over the foot.
-
Step 11: Make a figure eight.
-
Step 12: Begin wrapping.
-
Step 13: Work your way toward the ankle.
-
Step 14: Wrap the ankle.
-
Step 15: Finish the wrap.
Detailed Guide
For most people, the best choice of wrapping for a compression wrap is a cloth elastic bandage, sometimes colloquially known as an “ACE bandage,” after a common brand of elastic bandage.
Any brand of elastic bandage will work.
However, wider bandages (between one-and-half and three inches wide) are usually easier to use.
Cloth elastic bandages are comfortable, since they're made of stretchy cloth.
They are also reusable. (When you're finished, you can wash it and use it again when you need it.) Some bandages come with metal clips for fastening the end of the wrap.
If yours does not include metal clips, medical tape can also be used to secure the end of the bandage when the wrap is complete.
You can also securely tuck the end of the bandage into the wrap.
If your elastic bandage is not already wrapped, roll the bandage into a tight coil.
Compression wraps should fit against the foot and ankle snugly, so it helps to have the cloth wrap coiled tightly from the beginning, making it less likely that you will need to stretch and readjust the bandage as you go. , If you are wrapping your own ankle, it may be easier to position the rolled bandage on the inside of your foot.
If you are wrapping someone else’s ankle, it may be easier position the rolled bandage on the outside of the foot.
In either case, it’s crucial that coil face away from the foot, so that the coiled portion of the bandage is on the outside of the foot as you wrap it.
For example, if you think of the coiled bandage as a roll of toilet paper and the foot as a wall, the coiled bandage should be in an “under” orientation., For extra support, you can place a gauze pad on either side of the ankle before wrapping.
Horseshoe-shaped padding cut from foam or felt is also used for extra stability in compression wraps. , In most cases, it’s best to use a cloth bandage to wrap a sprain; however, some individuals engaged in athletic activity, such as running, prefer the feel of athletic tape.
While athletic tape works to wrap an injured ankle, it is primarily made to wrap an uninjured joint before activity to avoid injury, not to protect an already injured ankle.
Even though the thinner, sturdier athletic tape makes continued activity easier than the bulkier, more flexible cloth bandage, continued athletic activity on a sprained ankle is not advised., Underwrap is a nonadhesive material used to wrap the foot and ankle before the tape is applied, so that the tape doesn't pull at the surface of the skin.
Starting at the ball of the foot, wind the underwrap around the foot up to the ankle, leaving the heel uncovered.
Underwrap is available at drugstores and sporting goods stores.
It is possible to tape an ankle without underwrap, but it is much less comfortable. , Cut a strip of tape long enough to wrap 1 1/2 times around your ankle.
Wind it around your ankle, over the underwrap, to hold the underwrap in place.
This is called the anchor, since it anchors the rest of the taping in place.
If the ankle has a lot of hair, it can be shaved so that the tape doesn't stick to it.
If necessary, use a second piece of tape to make sure the underwrap is secure. , Place the end of a piece of tape on one side of the anchor.
Bring it down under the arch of the foot and back up to the other side of the anchor.
Press it lightly to secure it in place.
Repeat with two more pieces of tape overlapping the first one to create a sturdy stirrup. , Place the end of a piece of tape at the ankle bone and run it diagonally over the top of the foot.
Bring it down under the arch and toward the inside of the heel.
Then bring it around the back of the heel and back up over the foot to create the other part of the "x."
Place the end of a piece of tape on the outside of the ankle, just above the bone.
Run it over the top of the foot at an angle, then bring it under the arch and up the other side of the foot.
Next bring it around the ankle and back to the point where you started.
Repeat the figure eight.
Use another piece of tape to make a second figure eight that overlaps the first one.
This will ensure that the wrap is held securely in place and provides enough support for the ankle to heal properly. , Place the end of the bandage where the toes meet the foot.
Begin by wrapping the bandage around the ball of the foot.
Hold the end of the bandage against the ball of the foot with one hand, and use the other to bring the tail around the foot from the outside.
Keep the bandage tight, but don't wrap it so tight that it decreases blood flow to the foot and toes. , Wrap the ball of the foot twice, to hold the bandage in place, then begin moving up towards the ankle, being sure to leave at least one-half inch of bandage overlapping the previous layer.
Make sure the layers are smooth and even with no unnecessary bulges or lumps.
Start over if you need to do the job more neatly. , When you get to the ankle, bring the end of the bandage up outside of the foot, over the instep and around the inside of the ankle.
Then bring it around the heel, back up over the instep, under the foot, and around the ankle.
Continue making this “figure eight” around the ankle several times to fully stabilize the ankle. , The last wrap should rise several inches above the ankle to help stabilize it.
Use the metal fasteners or medical tape to secure the remaining bandage.
Excess bandage can also be tucked under the last layer of bandage, provided there’s not too much excess.
If you are wrapping a child's ankle, there may be too much excess bandage, and it will have to be cut.
About the Author
Ashley Nelson
Writer and educator with a focus on practical practical skills knowledge.
Rate This Guide
How helpful was this guide? Click to rate: