How to Make a Webcam Stand out of a Coke Can

Step-by-Step Guide

1. 1

   Step 1: Get an empty Coke can

   (Make sure the webcam is Longer Than 4 1/2 inches and shaped like a ball or it will fall in!!!) , If it works, continue! ,, (Big enough to support an empty coke can!) ,,, You might consider painting the cardboard too. , Make sure the tape is strong enough to support a coke can and a webcam, but make sure you could undo it if you wanted. ,,,, Put your webcam there and enjoy!!!
2. 2

   Step 2: and a pair of old scissors/shears;

3. 3

   Step 3: Grab a pair of gloves (thick enough not to cut yourself during project

4. 4

   Step 4: but thin enough to attain proper hold on scissors/shears.

5. 5

   Step 5: Take the pair of scissors/shears and cut off the very top of the can

6. 6

   Step 6: If possible

7. 7

   Step 7: take the holder off of the webcam.

8. 8

   Step 8: Place the webcam on the hole.

9. 9

   Step 9: Take the webcam off of the hole.

10. 10

    Step 10: Get some glue

11. 11

    Step 11: A block of wood

12. 12

    Step 12: and a hard thing to go on top of the block of wood.

13. 13

    Step 13: Sand the block of wood until it is to the shape you want.

14. 14

    Step 14: Paint and dry the block of wood.

15. 15

    Step 15: Find some cardboard and glue the block of wood to it.

16. 16

    Step 16: Tape the cardboard to a desk or something.

17. 17

    Step 17: Get a hard piece of wood or something that's big enough to have a coke can on it and glue it on top of the block of wood.

18. 18

    Step 18: Glue the coke can on top of the hard piece of wood.

19. 19

    Step 19: After it dries

20. 20

    Step 20: Put 8 pieces of tape on the side of the coke can and make sure that they stick to the hard piece of wood.

21. 21

    Step 21: It is complete!

Detailed Guide

About the Author