How to Connect Jambox to iPhone

Step-by-Step Guide

1. 1

   Step 1: Plug your Jambox speaker into the wall.

   It comes with a charger cord that fits into a 2-prong wall outlet.
2. 2

   Step 2: Opt to connect your Jambox directly to your computer to charge it.

   You can plug a micro USB cord into your Jambox.
   
   Connect the other end to your USB port.
   
   Make sure you are not connecting the micro USB cord to a keyboard.
   
   It will not charge if connected to a computer accessory other than a USB hub. , It will flash a red light until it is charged.
   
   It takes about
   2.5 hours to fully charge a Jambox. ,,, The LED ring light should flash red and white. , There is a top, middle and down position. , It will be able to pair via Bluetooth at this distance or less. , Go to your Home screen.
   
   Select the Setting app. , Tap on it. , Wait a few seconds for it to search for devices. , Tap on it. ,
3. 3

   Step 3: Wait for the LED ring light on the side of the Jambox to flash a white light.

4. 4

   Step 4: Disconnect the charger cord when charging is complete.

5. 5

   Step 5: Hold the power switch on the side of the Jambox in the up position for 3 seconds.

6. 6

   Step 6: Listen for an audio message from the Jambox that informs you it is in pairing mode.

7. 7

   Step 7: Lower the Power button to the middle position.

8. 8

   Step 8: Bring your iPhone within 33 feet (10.1 m) (11 yards) of your Jambox.

9. 9

   Step 9: Turn on the iPhone.

10. 10

    Step 10: Look for the word “Bluetooth” near the top of your Settings list.

11. 11

    Step 11: Slide the Bluetooth radio button into the on position

12. 12

    Step 12: if it is turned off.

13. 13

    Step 13: Look for “Jambox by Jawbone” in the list of available devices.

14. 14

    Step 14: Enter the general passcode of “0000.” Your Jambox and iPhone should be connected.

Detailed Guide

About the Author