How to Do Rubber Band Printing

Step-by-Step Guide

1. 1

   Step 1: Cut down a piece of cardboard with a craft blade.

   Something around 6 inches (15.24 centimeters) square would be ideal, but you can make it larger or smaller if you want.
   
   This will be the base for your print.
   
   If you are a kid, ask an adult to help you with this step.
2. 2

   Step 2: Wrap rubber bands around the cardboard.

   Use thick and thin rubber bands for an interesting effect.
   
   Place some at angles, and cross others.
   
   Make some closer together than others., Use a paintbrush to get a thick coat of paint over both the cardboard and the rubber bands.
   
   You can use acrylic paint or tempera paint. , Smooth the cardboard down with your hands.
   
   The cardboard and rubber bands will press up against the paper , creating an interesting effect., The rubber bands will be stamped against the paper.
   
   Some of the cardboard between the rubber bands may also be visible. , Let the paint dry first, then flip the cardboard over and paint the back using a contrasting color.
   
   Press the cardboard down onto the paper again, then lift it away.Try to off-set the cardboard this time, or turn it in the other direction.
3. 3

   Step 3: Paint one side of your wrapped cardboard.

4. 4

   Step 4: Press the cardboard down onto a sheet of paper.

5. 5

   Step 5: Lift the cardboard away to reveal your design.

6. 6

   Step 6: Consider repeating the process for a more unique design.

Detailed Guide

About the Author