How to Make Instagram Coasters

Step-by-Step Guide

1. 1

   Step 1: Pick out the Instagram pictures you want to print.

   Pictures should be printed on 4x6 paper.
   
   Cut the picture to fit on the tile.
   
   You can cut as much or as little as you’d like.
2. 2

   Step 2: Put the circular felt pads on the bottom of the tile.

   Four for each tile (one in each corner).
   
   By putting the felt pads on first you will ensure that the mod podge does not drip onto the surface you are working on, making the tile stick to it. , Keep it thin.
   
   You don’t want the Mod Podge dripping off the side. ,, Make sure you cover the edges of the tile with Mod Podge.
   
   This will ensure that the tile is soft and not rigid. ,,,, Make sure the tiles are completely dry before adding the finish. ,, The tiles are waterproof and sealed and are now ready to be used!
3. 3

   Step 3: Paint a layer of the Mod Podge on your tile.

4. 4

   Step 4: Press a photo firmly onto the tile and let sit for a few minutes.

5. 5

   Step 5: Paint a layer of Mod Podge over the photo and let dry for about 20 minutes – the mod podge will go on white

6. 6

   Step 6: but will dry clear.

7. 7

   Step 7: Apply 2-5 layers (letting them dry in between each layer) – dry for at least an hour after the last layer.

8. 8

   Step 8: Repeat these steps for all photos.

9. 9

   Step 9: Let the tiles sit overnight.

10. 10

    Step 10: Spray a thin layer of finish over the tiles.

11. 11

    Step 11: Let the tiles sit for 4 hours.

12. 12

    Step 12: You are finished!

Detailed Guide

About the Author