How to Program an ONN Universal Remote

Step-by-Step Guide

1. 1

   Step 1: Download the correct code list for your device from http://www.myonnremote.com/remote-codes.html.

   For example, if you want to program your remote for use with satellite or cable, scroll to the section entitled, “SAT / CBL.” , For example, if you’re programming the remote for a Samsung television, scroll to “Samsung” within the “TV” section. , For example, if you’re programming the remote for use with your DVD player, power on your DVD player. , The red indicator light should remain in a solid state. , For example, if you’re programming the remote for your television, press the “TV” button.
   
   The red indicator light will blink one time. , The red indicator light will turn off after you’ve entered the code.
   
   Make sure you enter the code within 35 seconds of pressing the device button.
   
   Otherwise, the remote will reset and you’ll be required to start over. , The device will power off, and setup will be complete.If your device fails to power off, enter the next four-digit code displayed in the manual, and try again.
   
   You must continue entering codes until your device powers off using the remote.
2. 2

   Step 2: Scroll to the category for the device you want programmed.

3. 3

   Step 3: Locate the brand of your device within that particular category.

4. 4

   Step 4: Power on the device you want to control using the remote.

5. 5

   Step 5: Press and hold the “Setup” button on your ONN remote for approximately two seconds.

6. 6

   Step 6: Release the “Setup” button

7. 7

   Step 7: then press the appropriate device button on the remote.

8. 8

   Step 8: Enter the first four-digit code displayed next to your device in the ONN manual using the remote.

9. 9

   Step 9: Point the ONN remote at the device you’re programming

10. 10

    Step 10: then press the “Power” button.

Detailed Guide

About the Author