How to Put on a Phone Charm
Take your phone charm out of the box or packet that it is currently in., Find a table or a flat surface to work on putting your phone charm on., Take off any phone cases or phone protectors., Now, with your hopefully case-free phone, here is what...
Step-by-Step Guide
-
Step 1: Take your phone charm out of the box or packet that it is currently in.
If it is in a packet and you are using scissors, be careful not to snap charm or the charm string.
If your phone has an antenna, just put the plastic circle thing around your antenna and you won't have to follow any more of these steps.
If you don't have an antenna but your phone charm has a plastic circle, just chop it off with scissors.
You can skip this step if you already have one. -
Step 2: Find a table or a flat surface to work on putting your phone charm on.
You should really use a FLAT surface because if you do it on something bumpy, or worse just hanging up in the air, you might mess up. , Don't worry, you'll be able to put them back on.
It's just that if you keep it on, it makes the next few steps a lot harder. , This is where you will slide the charm in. , You slide the end of the string part of your charm through the TOP hole is the upper left or right corner of the phone.
I used a pencil to kind of poke mine through but you could use anything.
Just be sure to concentrate. , So now you pull the end of the string so the phone charm is pressed up against the top of the phone and can't go any further. , This is probably the simplest step. , Now just pull the phone charm all the way down and you are set to go! ,, -
Step 3: Take off any phone cases or phone protectors.
-
Step 4: with your hopefully case-free phone
-
Step 5: here is what you do: Locate the two holes on the upper right or upper left part of your phone.
-
Step 6: This next part is a little tricky.
-
Step 7: you should have the end of the string through and it should be made into a big loop.
-
Step 8: Take the big loop and loop it over you phone charm.
-
Step 9: Pull it through.
-
Step 10: Put back any cases or protectors and have fun having your phone look great with it's new phone charm!
-
Step 11: Finished.
Detailed Guide
If it is in a packet and you are using scissors, be careful not to snap charm or the charm string.
If your phone has an antenna, just put the plastic circle thing around your antenna and you won't have to follow any more of these steps.
If you don't have an antenna but your phone charm has a plastic circle, just chop it off with scissors.
You can skip this step if you already have one.
You should really use a FLAT surface because if you do it on something bumpy, or worse just hanging up in the air, you might mess up. , Don't worry, you'll be able to put them back on.
It's just that if you keep it on, it makes the next few steps a lot harder. , This is where you will slide the charm in. , You slide the end of the string part of your charm through the TOP hole is the upper left or right corner of the phone.
I used a pencil to kind of poke mine through but you could use anything.
Just be sure to concentrate. , So now you pull the end of the string so the phone charm is pressed up against the top of the phone and can't go any further. , This is probably the simplest step. , Now just pull the phone charm all the way down and you are set to go! ,,
About the Author
Diane Ferguson
Brings years of experience writing about creative arts and related subjects.
Rate This Guide
How helpful was this guide? Click to rate: