How to Use Agar Agar
Find Agar and decide which form works best for you., Add Agar to the liquid and mix with a whisk., Bring the solution to a boil and allow it to simmer., Pour the mixture into a mold or container and leave it out at room-temperature to gel.
Step-by-Step Guide
-
Step 1: Find Agar and decide which form works best for you.
Agar usually comes in three forms: powder, flakes, or a bar.
All three work equally well; the real difference is ease of preparation.
Powdered Agar is usually the easiest to use, as it can be substituted for gelatin in a 1:1 ratio (1 teaspoon gelatin is equivalent to 1 teaspoon Agar powder).The powder also dissolves easier than flakes or bars.If you're not sure which type to use, default to the powdered Agar.
Agar bars are white, lightweight and made of freeze-dried Agar.
They can be ground in a coffee or spice grinder so they dissolve easier or can be broken up by hand.
One bar is equivalent to 2 teaspoons of Agar powder.Agar flakes can also be ground in a coffee or spice grinder and are less concentrated than the powder.
They are white and look a little like fish food. 2 tablespoons (29.6 ml) of Agar is roughly equivalent to 2 teaspoons of Agar powder.Look for Agar in natural food stores, Asian grocery stores, or online. -
Step 2: Add Agar to the liquid and mix with a whisk.
The firmness of the gel is determined by the amount of Agar you add.
If your recipe doesn't give you a measurement, you can follow this rule of thumb: to thicken 1 cup (.25 liters) of liquid, use 1 teaspoon Agar powder, 1 tablespoon (14.8 ml) Agar flakes, or 1/2 Agar bar.If you are substituting gelatin with Agar you can use the same amount of Agar powder to thicken the recipe.
Otherwise, for every teaspoon of gelatin you will need to use 1 tablespoon (14.8 ml) flakes or 1/2 bar.
If you are trying to jellify a somewhat acidic liquid, such as those derived from citrus fruits or strawberry, you may need to add more Agar.Some fruits are too acidic or contain enzymes that prevent gelling and must be broken down by being cooked first.
These fruits include kiwi, pineapple, fresh figs, papaya, mango, and peaches.Using canned versions of these fruits will cut out the extra step of cooking them, since canned fruits have all been pre-cooked.You can also hydrate the Agar in boiling water and then mix in the acidic liquid., The powder should simmer for about 5 minutes while the flakes and bars should take between 10-15 minutes.Stir the solution until the Agar is completely dissolved.
This process will hydrate the Agar, which will allow it to jellify the liquid when it cools.Warm up the liquid as much as possible.
One advantage of Agar is that it begins to set at a higher temperature than gelatin, so it is a solid at room temperature or even when you warm it up.
The liquid will begin to gel when it falls below 113°F (45°C).
Because the addition of other ingredients may cause the temperature to drop and the Agar to set before you are ready, getting the liquid as hot as you can will make it less likely to drop below 113°F (45°C) until you remove it from heat.If you are making an alcoholic gel, boil the Agar with any juices or mixers first, then whisk the alcohol in at the very last moment.
This will prevent the alcohol from evaporating., The mixture will begin to gel when it reaches 104°F to 113°F (40°C to 45°C) and will stay in this form as long as it stays below 175°F (80°C).
You don't need to refrigerate the gel unless you want to serve it cool, so you can leave your dish sitting out at room-temperature without it melting or collapsing.If you're not sure if you used the right amount of Agar, pour a small amount in a cold bowl to see if it firm up.
If it doesn't set after 30 seconds, add more Agar.
If it's too firm for your liking, add more liquid.Don't stir or shake the Agar jelly until it has completely set, or it will collapse.Don't grease, line, or oil the mold before pouring in the mixture.
It should pop out of your mold just fine, and these things can actually affect how well your mixture gels.Unlike gelatin, you can melt the gelled mixture (if you wanted to add another ingredient, pour it into a different mold, add more agar to make the gel more firm or add more liquid to soften it), bring it to a boil again, then cool it again without compromising its gelling abilities. -
Step 3: Bring the solution to a boil and allow it to simmer.
-
Step 4: Pour the mixture into a mold or container and leave it out at room-temperature to gel.
Detailed Guide
Agar usually comes in three forms: powder, flakes, or a bar.
All three work equally well; the real difference is ease of preparation.
Powdered Agar is usually the easiest to use, as it can be substituted for gelatin in a 1:1 ratio (1 teaspoon gelatin is equivalent to 1 teaspoon Agar powder).The powder also dissolves easier than flakes or bars.If you're not sure which type to use, default to the powdered Agar.
Agar bars are white, lightweight and made of freeze-dried Agar.
They can be ground in a coffee or spice grinder so they dissolve easier or can be broken up by hand.
One bar is equivalent to 2 teaspoons of Agar powder.Agar flakes can also be ground in a coffee or spice grinder and are less concentrated than the powder.
They are white and look a little like fish food. 2 tablespoons (29.6 ml) of Agar is roughly equivalent to 2 teaspoons of Agar powder.Look for Agar in natural food stores, Asian grocery stores, or online.
The firmness of the gel is determined by the amount of Agar you add.
If your recipe doesn't give you a measurement, you can follow this rule of thumb: to thicken 1 cup (.25 liters) of liquid, use 1 teaspoon Agar powder, 1 tablespoon (14.8 ml) Agar flakes, or 1/2 Agar bar.If you are substituting gelatin with Agar you can use the same amount of Agar powder to thicken the recipe.
Otherwise, for every teaspoon of gelatin you will need to use 1 tablespoon (14.8 ml) flakes or 1/2 bar.
If you are trying to jellify a somewhat acidic liquid, such as those derived from citrus fruits or strawberry, you may need to add more Agar.Some fruits are too acidic or contain enzymes that prevent gelling and must be broken down by being cooked first.
These fruits include kiwi, pineapple, fresh figs, papaya, mango, and peaches.Using canned versions of these fruits will cut out the extra step of cooking them, since canned fruits have all been pre-cooked.You can also hydrate the Agar in boiling water and then mix in the acidic liquid., The powder should simmer for about 5 minutes while the flakes and bars should take between 10-15 minutes.Stir the solution until the Agar is completely dissolved.
This process will hydrate the Agar, which will allow it to jellify the liquid when it cools.Warm up the liquid as much as possible.
One advantage of Agar is that it begins to set at a higher temperature than gelatin, so it is a solid at room temperature or even when you warm it up.
The liquid will begin to gel when it falls below 113°F (45°C).
Because the addition of other ingredients may cause the temperature to drop and the Agar to set before you are ready, getting the liquid as hot as you can will make it less likely to drop below 113°F (45°C) until you remove it from heat.If you are making an alcoholic gel, boil the Agar with any juices or mixers first, then whisk the alcohol in at the very last moment.
This will prevent the alcohol from evaporating., The mixture will begin to gel when it reaches 104°F to 113°F (40°C to 45°C) and will stay in this form as long as it stays below 175°F (80°C).
You don't need to refrigerate the gel unless you want to serve it cool, so you can leave your dish sitting out at room-temperature without it melting or collapsing.If you're not sure if you used the right amount of Agar, pour a small amount in a cold bowl to see if it firm up.
If it doesn't set after 30 seconds, add more Agar.
If it's too firm for your liking, add more liquid.Don't stir or shake the Agar jelly until it has completely set, or it will collapse.Don't grease, line, or oil the mold before pouring in the mixture.
It should pop out of your mold just fine, and these things can actually affect how well your mixture gels.Unlike gelatin, you can melt the gelled mixture (if you wanted to add another ingredient, pour it into a different mold, add more agar to make the gel more firm or add more liquid to soften it), bring it to a boil again, then cool it again without compromising its gelling abilities.
About the Author
Gloria Cooper
Brings years of experience writing about creative arts and related subjects.
Rate This Guide
How helpful was this guide? Click to rate: