How to Cook Steak in a Frying Pan
Choose a thick cut of steak over a thin one., Salt your steaks in advance and let them come to room temperature before pan frying., Oil the pan with 1 to 2 teaspoons of neutral oil (canola or brown nut works fine) over high heat., Lightly place the...
Step-by-Step Guide
-
Step 1: Choose a thick cut of steak over a thin one.
Thick cuts of steak (1 in/2.5 cm or more) can develop a beautiful outer crust without drying out the insides unnecessarily.
This task is a lot more difficult with thin cuts:
You risk overcooking the inside right when the outside has finished browning.
If you like your steak to have a perfectly-brown outside and a juicy, pink center, opt for thicker cuts of meat over thinner ones.
Ensure the steak is defrosted first, an icy steak won't season or sear properly. -
Step 2: Salt your steaks in advance and let them come to room temperature before pan frying.
Salt at least 40 minutes in advance of frying.
Salting too soon before cooking does the exact opposite of what you want to do:
It brings the moisture out to the surface.
When you salt far enough in advance that process can reverse:
The salt draws the moisture out to the surface, where it settles in small puddles.
Meanwhile the salt is tenderizing the meat and breaking down proteins.
After this quick tenderization happens, the moisture drawn out by the salt begins to seep back in to the steak.
This leaves your steak both more tender and more moist.Do not apply pepper just yet.
Pepper can burn during the pan frying, while salt cannot.
If you don't want the acrid taste of pepper on your beautiful steak, hold off until just after you've finished frying the steak. , Wait until the oil just starts to smoke.
This means that the pan is ready to take the steak. , If the pan has raised ridges, you can set your steak in at an angle in order to give it a crosshatch pattern. , To flip or not to flip — that is the question.
While many cooks choose to flip the steak only once to develop full color on each side, many food scientists have recently begun to weigh in on the question, and their findings point to a different answer.
The frequent flipping club has discovered that food that is flipped often cooks faster and more evenly.On the flip side, the meat doesn't have enough time to develop the best possible charring, although it still develops plenty of flavor.
Try it out for yourself and see which method produces the best steak for you.
Cooking is all about suiting your own preferences.
Those preferences should speak loudest. , A thicker cut will obviously require longer cooking, while a thinner cut will get cooked quicker. , The butter will give the steak a rich, nutty flavor.
Tilt the pan slightly and spoon the melted butter on top of the steak for even coverage.
If you want to add any herbs or aromatics to your steak — although a good steak will not need them — consider adding any one of the following:
Rosemary Lavender Thyme Sage Garlic , A thermometer is your best bet for producing a great-tasting steak consistently each time. (Alternately, you can use the finger test.) A handy electronic thermometer will only pierce the surface of the skin lightly and should be able to tell you if your steak is nearing the desired doneness.
For a guide on what temperature you want to cook your steak to, study the following chart: 120° F (48.8° C) = Rare 130° F (54.4° C) = Medium rare 140° F (60° C) = Medium 150° F (65.5° C) = Medium well 160° F (71.1° C) = Well done , Your steak will continue cooking somewhat even after you remove it from the pan.
This is why you remove it before it's actually finished cooking.
And, of course, let your steak rest for at least five minutes by covering it with a tent of aluminum foil.
If you don't let your steak rest properly, all the juices will spill out when you cut into it.
That's because the muscle fibers tighten up during cooking, sending the juices to the center of the cut, where the meat is still relatively rare and light.
Resting the meat allows the muscle fibers to relax, sending the juices back through the entire piece of meat.
Then, when you cut it up, your steak is both more tender and more juicy. , You can either cut your steak into relatively thick slices or let your guests tuck into it on their own. -
Step 3: Oil the pan with 1 to 2 teaspoons of neutral oil (canola or brown nut works fine) over high heat.
-
Step 4: Lightly place the steak in the pan and begin to fry.
-
Step 5: Decide whether you're going to flip the meat often or only once.
-
Step 6: Cook the steak for anywhere from 3 to 6 minutes per side
-
Step 7: depending on thickness and desired doneness.
-
Step 8: About 2 minutes before steak is ready
-
Step 9: add 2 tablespoons of butter into the pan
-
Step 10: along with any herbs or aromatics.
-
Step 11: Use a thermometer to test doneness.
-
Step 12: About 5° F (3° C) before your steak is done
-
Step 13: remove it from the pan and set it aside to cool.
-
Step 14: Serve your steak and enjoy.
Detailed Guide
Thick cuts of steak (1 in/2.5 cm or more) can develop a beautiful outer crust without drying out the insides unnecessarily.
This task is a lot more difficult with thin cuts:
You risk overcooking the inside right when the outside has finished browning.
If you like your steak to have a perfectly-brown outside and a juicy, pink center, opt for thicker cuts of meat over thinner ones.
Ensure the steak is defrosted first, an icy steak won't season or sear properly.
Salt at least 40 minutes in advance of frying.
Salting too soon before cooking does the exact opposite of what you want to do:
It brings the moisture out to the surface.
When you salt far enough in advance that process can reverse:
The salt draws the moisture out to the surface, where it settles in small puddles.
Meanwhile the salt is tenderizing the meat and breaking down proteins.
After this quick tenderization happens, the moisture drawn out by the salt begins to seep back in to the steak.
This leaves your steak both more tender and more moist.Do not apply pepper just yet.
Pepper can burn during the pan frying, while salt cannot.
If you don't want the acrid taste of pepper on your beautiful steak, hold off until just after you've finished frying the steak. , Wait until the oil just starts to smoke.
This means that the pan is ready to take the steak. , If the pan has raised ridges, you can set your steak in at an angle in order to give it a crosshatch pattern. , To flip or not to flip — that is the question.
While many cooks choose to flip the steak only once to develop full color on each side, many food scientists have recently begun to weigh in on the question, and their findings point to a different answer.
The frequent flipping club has discovered that food that is flipped often cooks faster and more evenly.On the flip side, the meat doesn't have enough time to develop the best possible charring, although it still develops plenty of flavor.
Try it out for yourself and see which method produces the best steak for you.
Cooking is all about suiting your own preferences.
Those preferences should speak loudest. , A thicker cut will obviously require longer cooking, while a thinner cut will get cooked quicker. , The butter will give the steak a rich, nutty flavor.
Tilt the pan slightly and spoon the melted butter on top of the steak for even coverage.
If you want to add any herbs or aromatics to your steak — although a good steak will not need them — consider adding any one of the following:
Rosemary Lavender Thyme Sage Garlic , A thermometer is your best bet for producing a great-tasting steak consistently each time. (Alternately, you can use the finger test.) A handy electronic thermometer will only pierce the surface of the skin lightly and should be able to tell you if your steak is nearing the desired doneness.
For a guide on what temperature you want to cook your steak to, study the following chart: 120° F (48.8° C) = Rare 130° F (54.4° C) = Medium rare 140° F (60° C) = Medium 150° F (65.5° C) = Medium well 160° F (71.1° C) = Well done , Your steak will continue cooking somewhat even after you remove it from the pan.
This is why you remove it before it's actually finished cooking.
And, of course, let your steak rest for at least five minutes by covering it with a tent of aluminum foil.
If you don't let your steak rest properly, all the juices will spill out when you cut into it.
That's because the muscle fibers tighten up during cooking, sending the juices to the center of the cut, where the meat is still relatively rare and light.
Resting the meat allows the muscle fibers to relax, sending the juices back through the entire piece of meat.
Then, when you cut it up, your steak is both more tender and more juicy. , You can either cut your steak into relatively thick slices or let your guests tuck into it on their own.
About the Author
Adam Ramirez
Creates helpful guides on cooking to inspire and educate readers.
Rate This Guide
How helpful was this guide? Click to rate: