How to Raise Brine Shrimp
Go shopping., Determine the best location for the tank.Saltwater tanks should not be near any windows, doors, heater vents, direct sunlight, or air conditioners so the temperature of the water does not change rapidly., Rinse the tank to remove any...
Step-by-Step Guide
-
Step 1: Go shopping.
All of the supplies necessary will be found at an aquarium or pet store; you can shop online if that is more convenient.
You will need many supplies for your brine shrimp tank, including: 10 gallon tank Sponge filter (that comes with a tube, a sponge, and a hookup for the air pump) Air pump Tank heater and thermometer A package of brine shrimp cysts (eggs) Aquarium salt mix (setting up a brand new aquarium means you will need about 13 pounds of salt per 50 gallons) 1 gallon container with a lid 10 gallons reverse osmosis water Refractometer or hydrometer for measuring salinity Gravel vacuum Flashlight -
Step 2: Determine the best location for the tank.Saltwater tanks should not be near any windows
The tank should also be set up near electrical outlets because you will need to plug in the heater and air pump.
Leave room between the tank and the wall so the air pump will easily fit.
The surface should also be level. , Dry the outside of the tank once you are done, and then place the tank where it belongs in your home. , Make a saltwater mixture with aquarium salt and reverse osmosis filtered water.Fill the 10 gallon tank with 9 gallons of water so there is room for the salt.
Then, add the salt per manufacturer’s instructions.The salt container will have specific instructions for calculating the amount of salt necessary for your tank.
Don’t worry if you add too much or too little salt; you can adjust the levels before adding the brine shrimp cysts. , The salinity of the tank should always be 30-35 ppt (parts per thousand).Use the instructions for your refractometer or hydrometer to measure the salinity of the tank, and add more salt or more reverse osmosis water accordingly.
Operating the refractometer or hydrometer involves placing some of the water inside via a dropper or other apparatus.
Test the water until you reach the correct salinity.
If you’ve mixed the saltwater correctly according to the manufacturer’s instructions, you will not have to tinker with the mixture. , This is the best filter to use in the tank because it will provide aeration, filter the tank water, and won’t suck up the tiny brine shrimp.The filter should include a tube, a sponge, and a hookup for the air pump; if it does not include the hookup for the pump, buy this separately.
You can place the sponge filter on the bottom of the tank or mount it to the side of the tank, depending on the model you purchased.
There are many cheap filters on the market nowadays, but do not scrimp on filtering equipment.
Faulty filters may cause the brine shrimp to die., Using airline tubing, attach the end of the sponge filter to the end of the air pump.Plug the pump in, and the filter will begin working.
Keep the filter on a sturdy surface behind or below the tank. , Set up the heater according to the manufacturer’s instructions.
Once you plug it in, you can begin to control the temperature of the tank. , Place the thermometer on the opposite end of the heater so it is easily visible.Once both the heater and thermometer are installed, you can adjust the heater so the tank is always at the correct temperature: 68°F (20°C)-79°F (25°C).
Turn it up or down accordingly. , Once the tank has maintained this temperature for 24 hours, it is stable enough to hold the brine shrimp.
Check the temperature at least twice a day—if the heater is accidentally unplugged or the temperature drastically changes for any reason, your brine shrimp could die. , Packets of dehydrated brine shrimp cysts are sold at aquarium and pet stores.Beginning with one packet is fine, since the brine shrimp will multiply rapidly. , 12 hours after that, you will have young shrimp swimming around in the tank. , Brine shrimp will multiply quickly.
They will begin as tiny cysts and end up as small shrimp.
You do not need to aid them in hatching or growing, since they will do so naturally in a well-maintained tank.
If your brine shrimp are not growing or hatching, check the salinity and temperature of the tank for problems.
It is natural for some of the brine shrimp to die. , Always having a gallon of saltwater ready will make changing the water much easier.
Fill a gallon container with reverse osmosis water.
Add the salt per manufacturer’s instructions.Cap the container, and store the saltwater in a cool, dry area until you need it. , Let the air in the tank settle so it is not moving.
Shine a bright light at the surface of the tank so the brine shrimp all flock to it.
Siphon the dirty water off the bottom of the tank with the gravel vaccum.
Then, replace the siphoned water with some of the marine salt mixture you made earlier.
Check the salinity and temperature of the tank to make sure the levels are good. , To rinse or replace the filter, turn off the air pump, remove the sponge, and rinse it.
When it is clean again, replace it, and turn the air pump back on.
About once every year, you will need to get a brand new sponge.
Use a flashlight to herd the brine shrimp away from the sponge filter when doing this.
You may need someone to help you grab the filter or shine the light. , All of these factors are important to keep in mind when you are maintaining a saltwater habitat.
Get into the habit of checking these factors weekly. , Selcon is a popular brand, and there are many others available at most aquarium stores.
Ask an employee for help if you have trouble finding the formulas, or use an online store to buy the food in bulk. , Brine shrimp are not picky, and they will eat these human foods.
Spirulina is another option to feed the brine shrimp. , Do not overfeed the brine shrimp! If the tank water begins to look excessively murky and dirty with food, clean the tank and feed the brine shrimp smaller amounts. , Of course, if you are raising brine shrimp purely for pleasure, you do not have to harvest them, but after 8 days, the adults are large enough to catch with a net and feed to other fish. , After about 10 minutes, the empty cysts shells will float to the surface, and unhatched cysts will sink to the bottom.Now, you can more easily catch the live brine shrimp. , All of the brine shrimp will flock to the light, so they will be easy to catch with the fish net. , Catch the amount you wish to feed to your other fish. , Place them in the tank of the fish you want to feed.
Your other fish will get to enjoy the nutritious brine shrimp. -
Step 3: heater vents
-
Step 4: direct sunlight
-
Step 5: or air conditioners so the temperature of the water does not change rapidly.
-
Step 6: Rinse the tank to remove any dust.
-
Step 7: Fill the tank with a saltwater mixture.
-
Step 8: Track the salinity with a refractometer or a hydrometer.
-
Step 9: Set up a slow air-powered sponge filter.
-
Step 10: Attach the air pump to the sponge filter.
-
Step 11: Install the heater.
-
Step 12: Install the thermometer using manufacturer’s directions.
-
Step 13: Keep the tank between 4°F (20°C)-79°F (25°C) for 24 hours.
-
Step 14: Buy brine shrimp eggs.
-
Step 15: Place the cysts in the water
-
Step 16: and they will hatch after 15 to 20 hours.If your tank is the correct temperature and salinity for the shrimp
-
Step 17: they will hatch within a day.
-
Step 18: Enjoy watching the brine shrimp population grow.
-
Step 19: Make a reserve of saltwater.You will need to keep the saltwater on hand for when you change the tank water.
-
Step 20: Use a gravel vacuum to change the water in the hatchery regularly
-
Step 21: about 20% (2 gallons) per week.Turn off the aeration and circulation system before changing the water.
-
Step 22: Rinse or replace the sponge filter every 1-4 weeks.The sponge filter may get noticeably dirty.
-
Step 23: Regularly check the tank’s temperature
-
Step 24: salinity
-
Step 25: and cleanliness.
-
Step 26: Use enrichment formulas.
-
Step 27: Feed the brine shrimp yeast
-
Step 28: pureed greens
-
Step 29: powdered eggs
-
Step 30: or powdered milk.
-
Step 31: Feed only small amounts
-
Step 32: but do so several times a day.
-
Step 33: Begin harvesting the brine shrimp after 8 days.
-
Step 34: Turn off the circulation system.
-
Step 35: Shine a flashlight where you want them to herd.
-
Step 36: Use a fish net to catch the adult brine shrimp.The smaller brine shrimp will fall through the net
-
Step 37: but larger ones won’t.
-
Step 38: Feed the brine shrimp directly to other fish.
Detailed Guide
All of the supplies necessary will be found at an aquarium or pet store; you can shop online if that is more convenient.
You will need many supplies for your brine shrimp tank, including: 10 gallon tank Sponge filter (that comes with a tube, a sponge, and a hookup for the air pump) Air pump Tank heater and thermometer A package of brine shrimp cysts (eggs) Aquarium salt mix (setting up a brand new aquarium means you will need about 13 pounds of salt per 50 gallons) 1 gallon container with a lid 10 gallons reverse osmosis water Refractometer or hydrometer for measuring salinity Gravel vacuum Flashlight
The tank should also be set up near electrical outlets because you will need to plug in the heater and air pump.
Leave room between the tank and the wall so the air pump will easily fit.
The surface should also be level. , Dry the outside of the tank once you are done, and then place the tank where it belongs in your home. , Make a saltwater mixture with aquarium salt and reverse osmosis filtered water.Fill the 10 gallon tank with 9 gallons of water so there is room for the salt.
Then, add the salt per manufacturer’s instructions.The salt container will have specific instructions for calculating the amount of salt necessary for your tank.
Don’t worry if you add too much or too little salt; you can adjust the levels before adding the brine shrimp cysts. , The salinity of the tank should always be 30-35 ppt (parts per thousand).Use the instructions for your refractometer or hydrometer to measure the salinity of the tank, and add more salt or more reverse osmosis water accordingly.
Operating the refractometer or hydrometer involves placing some of the water inside via a dropper or other apparatus.
Test the water until you reach the correct salinity.
If you’ve mixed the saltwater correctly according to the manufacturer’s instructions, you will not have to tinker with the mixture. , This is the best filter to use in the tank because it will provide aeration, filter the tank water, and won’t suck up the tiny brine shrimp.The filter should include a tube, a sponge, and a hookup for the air pump; if it does not include the hookup for the pump, buy this separately.
You can place the sponge filter on the bottom of the tank or mount it to the side of the tank, depending on the model you purchased.
There are many cheap filters on the market nowadays, but do not scrimp on filtering equipment.
Faulty filters may cause the brine shrimp to die., Using airline tubing, attach the end of the sponge filter to the end of the air pump.Plug the pump in, and the filter will begin working.
Keep the filter on a sturdy surface behind or below the tank. , Set up the heater according to the manufacturer’s instructions.
Once you plug it in, you can begin to control the temperature of the tank. , Place the thermometer on the opposite end of the heater so it is easily visible.Once both the heater and thermometer are installed, you can adjust the heater so the tank is always at the correct temperature: 68°F (20°C)-79°F (25°C).
Turn it up or down accordingly. , Once the tank has maintained this temperature for 24 hours, it is stable enough to hold the brine shrimp.
Check the temperature at least twice a day—if the heater is accidentally unplugged or the temperature drastically changes for any reason, your brine shrimp could die. , Packets of dehydrated brine shrimp cysts are sold at aquarium and pet stores.Beginning with one packet is fine, since the brine shrimp will multiply rapidly. , 12 hours after that, you will have young shrimp swimming around in the tank. , Brine shrimp will multiply quickly.
They will begin as tiny cysts and end up as small shrimp.
You do not need to aid them in hatching or growing, since they will do so naturally in a well-maintained tank.
If your brine shrimp are not growing or hatching, check the salinity and temperature of the tank for problems.
It is natural for some of the brine shrimp to die. , Always having a gallon of saltwater ready will make changing the water much easier.
Fill a gallon container with reverse osmosis water.
Add the salt per manufacturer’s instructions.Cap the container, and store the saltwater in a cool, dry area until you need it. , Let the air in the tank settle so it is not moving.
Shine a bright light at the surface of the tank so the brine shrimp all flock to it.
Siphon the dirty water off the bottom of the tank with the gravel vaccum.
Then, replace the siphoned water with some of the marine salt mixture you made earlier.
Check the salinity and temperature of the tank to make sure the levels are good. , To rinse or replace the filter, turn off the air pump, remove the sponge, and rinse it.
When it is clean again, replace it, and turn the air pump back on.
About once every year, you will need to get a brand new sponge.
Use a flashlight to herd the brine shrimp away from the sponge filter when doing this.
You may need someone to help you grab the filter or shine the light. , All of these factors are important to keep in mind when you are maintaining a saltwater habitat.
Get into the habit of checking these factors weekly. , Selcon is a popular brand, and there are many others available at most aquarium stores.
Ask an employee for help if you have trouble finding the formulas, or use an online store to buy the food in bulk. , Brine shrimp are not picky, and they will eat these human foods.
Spirulina is another option to feed the brine shrimp. , Do not overfeed the brine shrimp! If the tank water begins to look excessively murky and dirty with food, clean the tank and feed the brine shrimp smaller amounts. , Of course, if you are raising brine shrimp purely for pleasure, you do not have to harvest them, but after 8 days, the adults are large enough to catch with a net and feed to other fish. , After about 10 minutes, the empty cysts shells will float to the surface, and unhatched cysts will sink to the bottom.Now, you can more easily catch the live brine shrimp. , All of the brine shrimp will flock to the light, so they will be easy to catch with the fish net. , Catch the amount you wish to feed to your other fish. , Place them in the tank of the fish you want to feed.
Your other fish will get to enjoy the nutritious brine shrimp.
About the Author
Diane Peterson
A passionate writer with expertise in creative arts topics. Loves sharing practical knowledge.
Rate This Guide
How helpful was this guide? Click to rate: